ZCG solenoid valve for steam pipe, HTF pipelines and other high temperature medium. The solenoid valve according to the material is divided into two kinds of stainless steel and cast steel, cast steel material for ordinary media pipe, stainless steel for corrosive acid-base medium pipe. ZCG solenoid valve internal material fittings are made of stainless steel 304 material, the seals are used high temperature PPL material temperature up to 350 degrees. At present, the ZCG solenoid valves manufactured by our factory have been greatly improved in applicability compared with the past. The installation of a short spring at the upper part of the piston amends the previous phenomenon of piston expansion stuck due to overheating. ZCG solenoid valve heat sink improved heat finer and more rational. ZCG solenoid valve is the greatest improvement in its electromagnetic coil, we use a high temperature enameled wire outside the cooling mechanism to add, and coil installed in the long-term power module. Improvements in this paragraph make the coil more durable coil is not prone to high temperature medium caused by the coil burned phenomenon, but also to meet the use of the normally open solenoid valve can also be arbitrarily energized time. That is, you can do the normally open solenoid valve can also be used normally closed solenoid valve to use the best of both worlds. ZCG solenoid valve parameters: Nominal pressure: 1.6mpa Working pressure: 0.04-1.6mpa Working medium: steam, oil, high temperature gas liquid, etc. Operating temperature: -40-350 degrees
