The electronic crane is called the following summary when the object is in suspension: The electronic crane is an electronic weighing device that measures the mass (weight) of a suspended object. Electric hoists are required for the occasion of use. They are generally used in iron and steel mills, coil mills, steel mills, and docks. It is used with a crane to complete hoisting and metering in one time, which saves time and effort. It has functions such as easy operation, accurate measurement, adjustable resolution, wireless transmission stability, cumulative display, storage printing, overload alarm, etc. The shell is beautiful and sturdy. Anti-vibration, impact resistance, waterproof performance.
The electronic hanger is called when the object is in suspension. The following points should be noted: 1. There must be no jamming between the shackle of the electronic crane and the shaft pin of the suspended object, that is, the contact surface in the vertical direction. Should be located at the center point and must not be stuck on both sides. There should be sufficient freedom.
2. Do not raise objects that exceed the maximum weight of the electronic crane.
3. The electronic hanging scales, rigging, and hoisting fixtures are not allowed to hang heavy objects when not in use. They should be unloaded. In order to avoid permanent deformation of parts.
4. When running in the air, the lower end of the hanging object must not be lower than the height of one person. The operator should keep a distance of more than 1 meter from the hanging object.
5. It is forbidden to lift the object diagonally with the spreader group.
6. The front of the lift should be unmanned and unobstructed. It is forbidden to lift the object from the head.
The electronic hanger is called when the object is in suspension. The following points should be noted: 1. There must be no jamming between the shackle of the electronic crane and the shaft pin of the suspended object, that is, the contact surface in the vertical direction. Should be located at the center point and must not be stuck on both sides. There should be sufficient freedom.
2. Do not raise objects that exceed the maximum weight of the electronic crane.
3. The electronic hanging scales, rigging, and hoisting fixtures are not allowed to hang heavy objects when not in use. They should be unloaded. In order to avoid permanent deformation of parts.
4. When running in the air, the lower end of the hanging object must not be lower than the height of one person. The operator should keep a distance of more than 1 meter from the hanging object.
5. It is forbidden to lift the object diagonally with the spreader group.
6. The front of the lift should be unmanned and unobstructed. It is forbidden to lift the object from the head.
Medical Equipment Precision Parts
Two-Dimensional Galvanometer Base,Medical Equipment Precision Parts,Red Copper Medical Parts,Stainless Steel Medical Parts
RFC PRECISION MACHINE LIMITED , https://www.rfc-sz.com