Engraving machine will produce a large number of small debris in the milling and working process. These debris working sites can be seen everywhere. The traditional way of lubrication will cause debris to adhere to the surface of the workpiece, seriously affecting the quality of engraving, while most of the traditional engraving machines are used. A large number of emulsion spraying methods achieve lubrication and cooling. The disadvantage of this method is that the processing of any light-cutting parts also requires a large amount of emulsion to be sprayed on the one hand, which on the other hand causes the waste of the emulsion; on the other hand, it accelerates the aging of the equipment structure when the equipment After aging, the amount of emulsion leaking to the ground increases. The cutting tool also sprays the emulsion to the periphery during high-speed rotation. Over time, the environment is seriously polluted, and the skin and respiratory system of workers are affected by the emulsion under such circumstances. There will be potential harm, which is also an important factor in the loss of operating technicians. The application of the micro-lubrication technology has led to a significant improvement in the environment. After the product is processed, it saves a large amount of cleaning work and reduces labor costs and energy consumption.
The engraving machine uses Dopsey's micro-lubrication system to achieve quasi-dry cutting. The system can perform lubrication and cooling of machining tools and workpieces and remove debris according to the demand of machining rhythm during the milling process of the engraving machine according to actual work requirements. Any emulsion leakage, no excessive oil on the surface of the workpiece, thus reducing the order of the cleaning work, saving manpower and material resources, Quasi-dry cutting to avoid the harm of the workers skin damage, reduce the staff turnover rate, reduce training costs and improve effectiveness. At the same time, there was no oil spill, equipment and ground environment were clean, and zero discharge was achieved.
The engraving machine uses Dopsey's micro-lubrication system to achieve quasi-dry cutting. The system can perform lubrication and cooling of machining tools and workpieces and remove debris according to the demand of machining rhythm during the milling process of the engraving machine according to actual work requirements. Any emulsion leakage, no excessive oil on the surface of the workpiece, thus reducing the order of the cleaning work, saving manpower and material resources, Quasi-dry cutting to avoid the harm of the workers skin damage, reduce the staff turnover rate, reduce training costs and improve effectiveness. At the same time, there was no oil spill, equipment and ground environment were clean, and zero discharge was achieved.
Sheet Metal Fabrication Custom,Machining Parts,Sheet Metal Stamping,Sheet Metal Components
Shenzhen Bergek Technology Co.,LTD , https://www.szbergek.com