After the release of the second-generation Nexus 7 real machine appearance and the display of the film not long ago, the contents of the official product promotion pictures are further exposed. As for the actual time of publication, the current market is expected to be announced on July 24th by the senior vice president of Google Sundar Pichai at the time of the United States West Coast time, and the new version of Android 4.3 may also be announced at the same time.
According to the news released by @evleaks slightly earlier than on the personal Twitter page, the upcoming publication of the second generation Nexus 7 actual product promotional image, roughly in line with the previously exposed actual appearance, can clearly see the front-end video lens and the first generation Nexus 7 is slightly to the right, and there is indeed a set of camera lenses at the rear, estimated at 5 million pixels, and no flash is configured.
The current market estimates that the second-generation Nexus 7 will be released on July 24 at the senior vice president of Google Sundar Pichai, and may also release a new version of Android 4.3 news. As for the price part, information from previous exposure retail channel shows that it will be between USD 229 (16GB version) and USD 269 (32GB version).
In the hardware specification section, the second-generation Nexus 7 was reported to be equipped with a 7-inch Full HD display. The battery capacity is 4000mAh, and the Android 4.3 operating system may be built directly. However, in the processor part, the Qualcomm Snapdragon S4 APQ8064 1.5GHz quad-core processor was used separately, or the processor specifications produced by MediaTek were used.
Series Steel Structure Industrial Cooling Tower
Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.
Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,
gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.
Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.
Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.
Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.
Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.
Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com