The SP-S-35T vertical micro-precision high-speed injection molding machine of the Encyclopedia vertical micro-precision high-speed injection molding machine (Multitech) is a SP high-speed, high-precision series. The machine uses a double metal tube set to enhance its precision, wear resistance and stability. SP-S-35T can shorten the reaction time of the machine during activation and stop. The injection speed can be as high as 338mm/s, and the injection pressure can reach 2811kg/cm2. The combination of the shooting cylinders is placed in parallel with an auxiliary guide column to ensure that the machine maintains its stability and reliability even at high speeds. In addition, by equipped with a split type fuel tank, it can achieve the advantages of clean oil storage and convenient separation.
The control unit of SP-S-35T vertical micro-precision high-speed injection molding machine adopts Japan Fuji UG330 high-end touch color liquid crystal display, and cooperates with Japan OMRON PLC's latest high-response controller, which can effectively monitor all major pressures, positions, speeds, etc. Parameters that successfully improve the automation of the machine. At the same time, all the main action units are controlled by high-precision Italian electronic ruler and pressure sensor, which can set a small amount of 0.05mm.
In terms of the clamping unit, the machine adopts vertical clamping and sliding mode to facilitate the retrieval. The pressure and flow of the hydraulic system are controlled by the German BOSCH high-flow high-precision semi-closed proportional valve, ensuring low energy consumption and fast operation. The SP-S-35T's injection system uses the Japanese NACHI directional flow valve. Due to its fast response, it ensures stable and accurate micro-precision injection.
Datong high-speed thin-wall forming machine EC series model is a special injection molding machine for tableware. It is a new model developed by Datong Machinery for general-purpose plastics (such as PP and PE) with thin wall, short molding cycle and high production efficiency. The first injection molding machine for thin-walled container products is suitable for the production of thin-walled products with a wall thickness of 0.45 mm or less. Features of the EC model include:
Fast and stable opening and closing, the machine has a short cycle;
Fast and precise injection to ensure accuracy and repeatability; 24:1 plasticized screw, with titanium-plated metal check ring, plasticized parts are highly efficient and durable; high-precision hydraulic valve and dead loop control, machine action switching response is sensitive, accurate position With open mold synchronous plasticizing function, the production cycle is shorter; 10.4 inch color LCD touch screen, easy to operate.
Based on the advanced technology of the Allrounder 630 S large-scale injection molding machine, the Allrounder 920 S new all-round injection molding machine lengthens the distance between the rods and improves the clamping force, which represents a significant increase in the size and performance of the S series models. . The Allrounder 920 S models have a distance of 920 x 920 mm between the tie rods and a clamping force of 5,000 kN.
With the introduction of the Allrounder 920 S new omni-directional injection molding machine, larger parts with larger parts and more cavities can be used on the Arburg omni-directional injection molding machine to produce molded parts with a clamping force of 5,000 kN.
The Allrounder 920 S Omni-directional injection molding machine also retains the characteristics of a "small model". For example, the height of the mold can be adjusted according to the size of the mold to suit the clamping device; the new pressure accumulator is provided for quick injection and mold movement; at the same time, the combined mechanical design is also adopted. Due to the above characteristics, the newly launched large-scale all-round injection molding machine can be used in the injection device of the previous S series models, and can also be equipped as a multi-component model.
The control unit of SP-S-35T vertical micro-precision high-speed injection molding machine adopts Japan Fuji UG330 high-end touch color liquid crystal display, and cooperates with Japan OMRON PLC's latest high-response controller, which can effectively monitor all major pressures, positions, speeds, etc. Parameters that successfully improve the automation of the machine. At the same time, all the main action units are controlled by high-precision Italian electronic ruler and pressure sensor, which can set a small amount of 0.05mm.
In terms of the clamping unit, the machine adopts vertical clamping and sliding mode to facilitate the retrieval. The pressure and flow of the hydraulic system are controlled by the German BOSCH high-flow high-precision semi-closed proportional valve, ensuring low energy consumption and fast operation. The SP-S-35T's injection system uses the Japanese NACHI directional flow valve. Due to its fast response, it ensures stable and accurate micro-precision injection.
Datong high-speed thin-wall forming machine EC series model is a special injection molding machine for tableware. It is a new model developed by Datong Machinery for general-purpose plastics (such as PP and PE) with thin wall, short molding cycle and high production efficiency. The first injection molding machine for thin-walled container products is suitable for the production of thin-walled products with a wall thickness of 0.45 mm or less. Features of the EC model include:
Fast and stable opening and closing, the machine has a short cycle;
Fast and precise injection to ensure accuracy and repeatability; 24:1 plasticized screw, with titanium-plated metal check ring, plasticized parts are highly efficient and durable; high-precision hydraulic valve and dead loop control, machine action switching response is sensitive, accurate position With open mold synchronous plasticizing function, the production cycle is shorter; 10.4 inch color LCD touch screen, easy to operate.
Based on the advanced technology of the Allrounder 630 S large-scale injection molding machine, the Allrounder 920 S new all-round injection molding machine lengthens the distance between the rods and improves the clamping force, which represents a significant increase in the size and performance of the S series models. . The Allrounder 920 S models have a distance of 920 x 920 mm between the tie rods and a clamping force of 5,000 kN.
With the introduction of the Allrounder 920 S new omni-directional injection molding machine, larger parts with larger parts and more cavities can be used on the Arburg omni-directional injection molding machine to produce molded parts with a clamping force of 5,000 kN.
The Allrounder 920 S Omni-directional injection molding machine also retains the characteristics of a "small model". For example, the height of the mold can be adjusted according to the size of the mold to suit the clamping device; the new pressure accumulator is provided for quick injection and mold movement; at the same time, the combined mechanical design is also adopted. Due to the above characteristics, the newly launched large-scale all-round injection molding machine can be used in the injection device of the previous S series models, and can also be equipped as a multi-component model.
Motorcycle Tyre,Motorcycle Spare Part,Motorcycle Part
Hana Auto Parts Co., Ltd. , http://www.zjautomirrors.com