China Suc Super Cell Marine Rubber Fender for Docks

1.Main products
Product name:China Suc Super Cell Marine Rubber Fender for Docks
Aohai Marine Fitting Co., Ltd mainly produce Super cell fenders (SC type), Cone fenders, Super Arch fenders (type SA), Cylindrical fenders (Type Y), Semi-circular fenders (Type D), Type GD fenders, Type I fenders, Type U fenders,Turn cell fenders, Type π rubber fenders, Rubber ladder, Rubber fenders for tug boats, penumatic rubber fenders, airbags, PVC yacht fenders etc. 
Certificate: ABS, LR, BV, NK, DNV, RINA, RS, IRS, CCS etc.  



2.Product description
Product name:China Suc Super Cell Marine Rubber Fender for Docks
A belt of strengthening rubber fender, including made of rubber fender  subject, in this type fender subject in the cross of the ring to set multi layer cord layer. The utility strengthening the layer this type rubber fender, installation is simple, convenient maintenance, strength big, not easy aging, bottom width of small size, reaction force moderate, absorb energy, resist collision, buffer performance is good, not easy to break, good flexibility, corrosion resistance, high strength and long service life. Can be widely used on ship, dock and port protection. 


3.Detailed data
Product name:China Suc Super Cell Marine Rubber Fender for Docks
Compared with common cell rubber fender, super cell rubber fender raised design compression 5%, thus maintain the reaction force while increase energy absorption value 17%.
The equipped steel frontal panel can greatly reduce the hull pressure, which makes it specially proper for the berthing of large ship.
UHMW-PE pad bolted on the steel frontal panel can lessen the friction factor between ship and fender system and reduce the shear force caused during ship berthing therefore prolong the fender system service life.



4.Packing and delivery
Product name:China Suc Super Cell Marine Rubber Fender for Docks


5.Application
Product name:China Suc Super Cell Marine Rubber Fender for Docks
1.Bulk terminals
2.Offshore platforms
3.Container berths
4.General cargo berths
5.Features of Super Cell rubber fender
6.High performance
7.Can support large panels
8.Strong, well-proven design
9.Low hull pressure systems
10.Wide choice of rubber compounds

6.Our advantage
Product name:China Suc Super Cell Marine Rubber Fender for Docks
1. On the basis that counterforce do not increase, if deflection distance augments by 13%, energy absorption will rise by 17% while counterforce energy absorption ratio (E/R@H) of each unit will go up by 15%.
2. Among stress fender series, TD-A fender owns the highest energy absorption for each unit;
3. Frontal berthing is fixed on frontal fender in an effort to alleviating stress acted upon sides of ship. According to specific demand, surface stress can drop to as low as 25t/m2. Thus, it is particularly suitable for berthing of large vessels.
4. Owing to high reaction force energy absorption per unit, it is can excellently meet the requirements of open sea wharf and dolphin type berth.
5. Among stress rubber fender series, TD-A cell fender possesses relatively small inclination and stress change in performance;
6. PE frontal pad is fixed in the front of frontal berthing to lower friction coefficient and reduce the shear force in berthing by large margin.

7.Contact us


 

Multi-Cavity Injection Molding

The team specializes in looking for any potential problems with part geometry or tolerances that could lead to poor steel construction or require special tool functions such as lifters, sliders, and threads/dethreads. The physical and chemical properties of the selected resin were evaluated in order to select the appropriate die steel and evaluate the cooling effect of the die. In addition to determining the appropriate vent location, mold flow assessment is performed to determine the best gate type and gate location.
Manufacturability reviews include validation of standard plastic design practices and integration of mold details to create the most robust designs. Confirm the specifications and source of the tools and the source of the purchased parts. In addition, a comprehensive process failure mode impact analysis (FAILURE) was completed. Our company can also make molds for customers, low cost, high quality products. At the same time, we will provide services for the whole mold project development, including design, mold manufacturing, Plastic Parts production and after-sales service.

Multi-Cavity Injection Molding,Plastic Injection Molding Product,Multi-Cavity Design Plastic Injection Molding,Multi-Cavities Steel Injection Molding

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjinjectionmolding.com