1.  Product Show              Â
                                                                    Â
           2.  Product Description              Â
 argon Pressure Regulator/Reducing Valve With Flowmeter
Â
Moder No. | Service Medium |
Max inlet pressure (bar)Â |
Max.outlet pressure (bar)Â |
Nominal Flowrate (L/min)Â |
Inlet Thread connect valve | Outlet Connection |
YQY740LA | O2 | 150 | 2-3 | 1-10/1-15 |
G5/8"-RH(Male) |
Nasl oxygen cannula/mask |
YQY740LA1 | O2 | 150 | 2-3 | 1-10/1-15 |
G5/8"-RH(Female) |
|
YQY740LA2 | O2 | 150 | 2-3 | 1-10/1-15 |
W21.8"-RH(Female) |
|
YQY740LA3 | O2 | 150 | 2-3 | 1-10/1-15 | G5/8"-RH(Male) |
|
YQY740LB | O2 | 150 | 2-3 | 1-10/1-15 | G5/8"-RH(Male) |
|
YQY740LIR | O2 | 150 | 2-3 | 1-10/1-15 | W21.8"-RH(Female) |
|
YQY740LC | O2 | 150 | 2-3 | 1-10/1-15 | W21.8"-RH(Male ) |
|
YQY740LB2 | O2 | 150 | 2-3 | 1-10/1-15 | G5/8"-RH(Male) |
|
YQY740LD | O2 | 150 | 2-3 | 1-10/1-15 | CGA540-RH(Female) |
|
YQY740LE | O2 | 150 | 2-3 | 1-10/1-15 | W21.8"-RH(Female) |
|
YQY740LF | O2 | 150 | 2-3 | 1-10/1-15 | G5/8"-RH(Female) |
|
YQY740LH | O2 | 150 | 2-3 | 2-15 | G5/8"-RH(Female) |
|
YQY740L-ALL IN | O2 | 150 | 2-3 | 0-8/0-15/0-25 | PZ19.2,PZ27.8 |
diss/barb  |
YQY740-870 | O2 | 150 | 2-3 | 0-8/0-15/0-25 | CGA870 | |
YQY740-870L | O2 | 150 | 2-3 | 0-8/0-15/0-25 | CGA870 | |
YQY740W1 | O2 | 150 | 2-3 | 1-10/1-15 | hospital oxygen wall system | |
YQY740W2 | O2 | 150 | 2-3 | 1-10/1-15 | ||
YQY740W3 | O2 | 150 | 2-3 | 1-10/1-15 |
                                                                   Â
Â
                                                                    Â
              4.  Our Services             Â
1.OEMÂ Accepted
A:Carve simple LOGO for you on cylinder shoulder by free.
B:Write shipping mark on outer packing carton according to your requirement.
C:Spray simple English letters, for example "Gas" ,"O2 Medical", and make water proof PVC label or sticker, colorful box, barcode ...etc.. according to your design.
2. Professional service
A: 24 hours on-line every day.
B: Quick reply your email and answer your questions.
C: Kind communication,  Careful attitude,Good patience,Professional product knowledge.
3.Good after-sales team
A:If there is any problem with the use of our product within two years, we can replace it for you a new product.Specific questions can contact customer service department
B:We also give some good advice to customers about there market.
C:Any questions about the product, We will contact the technical department in time to deal with the problem.
D.The quality supervision department may provide professional quality inspection certificates,test report of water pressure, air tightness, etc.
4.Deliver on time
Our delivery date is usually 25-30 days. We will send the goods to you on time according to the contract stipulation.
                                                                    Â
            5.  FAQ            Â
1. Can I do OEM in your factory?
 Yes, We provide OEM service to our customer.
2. What kind of certifications do you have for your products?
 We can offer CE, CB, RoHS, CCC,GS,UL,SAA.Others if our customer want it, we will get it.
3.What is the capacity of Soda Maker Cylinder?
Our capacity of Home Soda Maker Co2 cylinder is generally 0.6L. We can also supply the design and cylinder for your non-standard size.
4.Can you filling co2 gas into the 0.6L Co2 cylinder and what about the weight?
Yes! We can able to fill food grade co2 gas in the refilled co2 aluminum cylinder, and the price is very good. gas weight is about 360g-420g.
5.What about the working pressure?
It is about 150bar, we also have non-standard pressure.
6.What about the delivery time?
It generally will take us 25-30 days to finish the order.
                                                                    Â
             6.  Contact Me             Â
If you have any questions, or want to know more about the product information, you can contact me directly.
You can also direct access to our Web Query:http://shbene.en.made-in-china.com/
           1.  Product Show              Â
                                                                    Â
           2.  Product Description              Â
 argon Pressure Regulator/Reducing Valve With Flowmeter
Â
Moder No. | Service Medium |
Max inlet pressure (bar)Â |
Max.outlet pressure (bar)Â |
Nominal Flowrate (L/min)Â |
Inlet Thread connect valve | Outlet Connection |
YQY740LA | O2 | 150 | 2-3 | 1-10/1-15 |
G5/8"-RH(Male) |
Nasl oxygen cannula/mask |
YQY740LA1 | O2 | 150 | 2-3 | 1-10/1-15 |
G5/8"-RH(Female) |
|
YQY740LA2 | O2 | 150 | 2-3 | 1-10/1-15 |
W21.8"-RH(Female) |
|
YQY740LA3 | O2 | 150 | 2-3 | 1-10/1-15 | G5/8"-RH(Male) |
|
YQY740LB | O2 | 150 | 2-3 | 1-10/1-15 | G5/8"-RH(Male) |
|
YQY740LIR | O2 | 150 | 2-3 | 1-10/1-15 | W21.8"-RH(Female) |
|
YQY740LC | O2 | 150 | 2-3 | 1-10/1-15 | W21.8"-RH(Male ) |
|
YQY740LB2 | O2 | 150 | 2-3 | 1-10/1-15 | G5/8"-RH(Male) |
|
YQY740LD | O2 | 150 | 2-3 | 1-10/1-15 | CGA540-RH(Female) |
|
YQY740LE | O2 | 150 | 2-3 | 1-10/1-15 | W21.8"-RH(Female) |
|
YQY740LF | O2 | 150 | 2-3 | 1-10/1-15 | G5/8"-RH(Female) |
|
YQY740LH | O2 | 150 | 2-3 | 2-15 | G5/8"-RH(Female) |
|
YQY740L-ALL IN | O2 | 150 | 2-3 | 0-8/0-15/0-25 | PZ19.2,PZ27.8 |
diss/barb  |
YQY740-870 | O2 | 150 | 2-3 | 0-8/0-15/0-25 | CGA870 | |
YQY740-870L | O2 | 150 | 2-3 | 0-8/0-15/0-25 | CGA870 | |
YQY740W1 | O2 | 150 | 2-3 | 1-10/1-15 | hospital oxygen wall system | |
YQY740W2 | O2 | 150 | 2-3 | 1-10/1-15 | ||
YQY740W3 | O2 | 150 | 2-3 | 1-10/1-15 |
                                                                   Â
Â
                                                                    Â
              4.  Our Services             Â
1.OEMÂ Accepted
A:Carve simple LOGO for you on cylinder shoulder by free.
B:Write shipping mark on outer packing carton according to your requirement.
C:Spray simple English letters, for example "Gas" ,"O2 Medical", and make water proof PVC label or sticker, colorful box, barcode ...etc.. according to your design.
2. Professional service
A: 24 hours on-line every day.
B: Quick reply your email and answer your questions.
C: Kind communication,  Careful attitude,Good patience,Professional product knowledge.
3.Good after-sales team
A:If there is any problem with the use of our product within two years, we can replace it for you a new product.Specific questions can contact customer service department
B:We also give some good advice to customers about there market.
C:Any questions about the product, We will contact the technical department in time to deal with the problem.
D.The quality supervision department may provide professional quality inspection certificates,test report of water pressure, air tightness, etc.
4.Deliver on time
Our delivery date is usually 25-30 days. We will send the goods to you on time according to the contract stipulation.
                                                                    Â
            5.  FAQ            Â
1. Can I do OEM in your factory?
 Yes, We provide OEM service to our customer.
2. What kind of certifications do you have for your products?
 We can offer CE, CB, RoHS, CCC,GS,UL,SAA.Others if our customer want it, we will get it.
3.What is the capacity of Soda Maker Cylinder?
Our capacity of Home Soda Maker Co2 cylinder is generally 0.6L. We can also supply the design and cylinder for your non-standard size.
4.Can you filling co2 gas into the 0.6L Co2 cylinder and what about the weight?
Yes! We can able to fill food grade co2 gas in the refilled co2 aluminum cylinder, and the price is very good. gas weight is about 360g-420g.
5.What about the working pressure?
It is about 150bar, we also have non-standard pressure.
6.What about the delivery time?
It generally will take us 25-30 days to finish the order.
                                                                    Â
             6.  Contact Me             Â
If you have any questions, or want to know more about the product information, you can contact me directly.
You can also direct access to our Web Query:http://shbene.en.made-in-china.com/
Miniature Precision Ball Screws are an efficient and cost-effective solution in a small envelope, ideal for use in small spaces. Ball screw assemblies range from 4 to 20mm in diameter with leads from 1 to 20mm - all with standard lead accuracies of ±52µm/300mm. Miniature Ground Ball Screws are ideal for laboratory, semiconductor, and medical applications.
Miniature Precision Ground Ball Screw Highlights:
- Design maximizes load capacity
- Flexible ball nut mounting configurations
- Higher load capacity, longer life
- C3 C5 accuracy class, rapid prototyping
- Cost-effective, small envelope
- Smooth, efficient, ideal in small places
- Wide assortment of leads available
- Clearance held to .02mm max
- Optimum performance in low and high lead assemblies
Model | d | D | F | L | B | W | H | X | Dynamic load | Static load | Axial clearance |
MIF0401 | 4 | 10 | 20 | 12 | 3 | 15 | 14 | 2.9 | 490 | 700 | |
MIF0501 | 5 | 10 | 20 | 12 | 3 | 15 | 14 | 2.9 | 530 | 810 | |
MIF0601 | 6 | 12 | 24 | 15 | 3.5 | 18 | 16 | 3.4 | 580 | 1000 | |
MIF0602 | 6 | 12 | 24 | 15 | 3.5 | 18 | 16 | 3.4 | 750 | 1200 | |
MIF0801 | 8 | 14 | 27 | 16 | 4 | 21 | 18 | 3.4 | 780 | 1650 | |
MIF0802 | 8 | 14 | 27 | 16 | 4 | 21 | 18 | 3.4 | 1500 | 2600 | |
MIF0802.5 | 8 | 16 | 29 | 26 | 4 | 23 | 20 | 3.4 | 1850 | 3000 | |
MUF0804 | 8 | 16 | 29 | 26 | 4 | 23 | 20 | 3.4 | 2350 | 3300 |
adapted to normal screw leads, ball return cap, steel ball, ball nut
SCREW TECHNOLOGY CO., LIMITED , https://www.screw-tech.com