4" Aluminum Bottom Emergency Oil Tank Pipeline Valve

Specifications1.Material : Aluminum Alloy 
2.Diameter :4" 
3.Pressure :0.6Mpa 
4.Open method: Pneumatic 
5.Temperature range: -20-- +70 

1.  Bottom  Valve 

 

    Emergency Shut Valve is installed on the bottom of the tanker, the top parts is tightly sealed inside the tanker. External shear groove design limits product spillage when the tanker is crashed down,it will automatically cut off itself via this groove under the situation there's no affectation on the sealing. This will efficiently protect the over rolled tanker from leakage to ensure the safety when transportation. This product is suitable for water,diesel ,gasoline and kerosene and other light fuel,ect. 

 

2. Feature & Benefit

 

   * Special Surface Treatment

     The whole valve body is passed a special surface process to improve the anti-corrosion.

 

    * Hydrodynamic Body

Design and high lift popet minimizes pressure drop to give maximum flow rate.

 

    * External Shear Groove

Meets the standard requirements to limit product spillage in the event of an accident.

 

    * Manual Opening Device

When need to emergency discharging ,the pneumatic control is useless,it can be opened by manual way.

 

    * Easy-Installment

The size of the valve is more smart ,is suitable for the smaller space's demand.

 

     *  Easy Servicing

Allows the air cylinder piston to be replaced without removing the valve from the tank pipe work.

 

 

3. Installment drawing

 

The Vertical Fluid Bed Dryer is a batchwise dryer. It is used to dry particles or fine powders. The heat source can be electricity or steam.

Principle of working of Vertical fluid bed dryer

When air is purified and heated, it is introduced from the bottom of induced-draft fan and passed through the screen plate of raw material. In working chamber, the state of fluidization is formed through stirring and negative effect. The moisture is evaporated and removed rapidly and the raw material is dried quickly.

Features of Vertical fluid bed dryer

1,The structure of fluidization bed is round so as to avoid the dead angle

2,Inside the hopper there is a stirrer in order to avoid agglomeration of raw material and forming canal of flow

3,The granule is discharged through the method of turning over. In this way it is very convenient. The discharging system can be designed as required too

4,It is operated at the condition of negative pressure and seal. The air is filtered. Therefore it is simple in operation and convenient in clean. It is an ideal equipment that is in conformity with the requirements of GMP.

5,The drying speed is fast and the temperature is uniform. In general, the drying time is 15-45 minutes each batch

 In addition to them,we also production the vibration fluidized bed dryer.

Vertical Fluid Bed Dryer

Vertical Fluid Bed Granulator Dryer, Vertical Fluid Bed Dryer Machine, Vertical Fluid Bed Drying Equipment

Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com