The hydraulic gear pump is composed of a pair of intermeshing gears, and sucks and presses the oil through the change of volume when the gears are engaged and separated when rotating. When the gears are engaged, the hydraulic oil between the meshing two teeth cannot be discharged due to the sealing of the teeth, so that an oil trap phenomenon occurs. Trapped oil can generate high pressure, creating side pressure on the shaft, easily bending the shaft, prematurely damaging the bearings, and also consuming the motor's power. The solution is to open an oil draining groove on the side of the gear meshing to the oil discharge chamber so that the oil trapped between the two teeth can be discharged to eliminate the oil trapping phenomenon. Centrifugal Slurry Pump Impeller:
Centrifugal Slurry Pump impeller is the wearing parts, according to different application use different type slurry pump impeller can enhance the efficienciesefficiency of slurry pump. Our impeller can be the impeller. Our XXX series slurry pump are equivalent to AH series pumps Warman slurry pump, our impeller and other wearing parts can be the parts of Warman Slurry Pump Impeller .
K type impeller- Closed Non-clogging impeller. For clear water, lime slurry, the sewage and fluids containing solids and sludge which do not liberate gas.
N type impeller- closed multi-vane impeller. For clear water, the fluid containing slight suspension such as treated sewage, screen water,
O type impeller-Open impeller. Same application as [N" impeller but including fluids which contains air.
F type impeller Free flow impeller. For fluids containing coarse solids liable to bunch or plait (such as long fibue admixtures, sticky particles and so on) and fluids containing air.
OEM
-Can manufacture parts according to your drawings.
-Materials as follows:
1.High Chrome concentration alloy 1, Rockwell hardness HRC ≥60, high abrasion
application.
2.High Chrome concentration alloy 2, Rockwell hardness HRC ≥58, high
abrasion application .
3.High Chrome concentration alloy 3, both anti-abrasion and
corrosion-resistant, can be used in PH ≥4 and cl- 20000 ppm environment.
4. Other materials according to your requirements.
Slurry Pump Impeller
Slurry Pump Impeller,Slurry Vacuum Pump Vanes,Warman Slurry Pump Impeller,Warman Pump Impeller
Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd , http://www.bkdrtech.com