Screening is the use of a sieve to divide a material with a wide particle size range into several levels according to the particle size.
Grading is the division of different fractions depending on the rate at which the material settles in the medium (water or air).
5毫米的物料。 The sieving is generally used for a thicker material, that is, a material greater than 0.25 mm. Finer materials, ie materials less than 0.2 mm, are graded. However, in recent years, fine screens have been applied to the classification of grinding products at home and abroad, and the classification efficiency is generally high.
Screening operations can be divided into six categories depending on the purpose of screening.
( 1) Independent screening The purpose is to obtain a final product that is suitable for the user's requirements. For example, black metallurgical industry, often the higher iron-rich iron ore containing sieved into different size fractions, qualified bulk ore into the blast furnace, the iron ore fines or agglomerates by sintering furnace into blocks .
(2) Auxiliary screening This screening is mainly used in the crushing operation of the concentrator, which plays an auxiliary role in the operation of the mine. Generally, there are pre-screening and screening screening.
Pre-screening refers to the screening of the ore before it enters the crusher . The sieve is used to separate the part from the ore that is already qualified for the crusher, such as the sieve and the sieve installed before the coarse crusher. The lower product can be crushed without being crushed by a coarse crusher, which can reduce the amount of ore entering the crusher and increase the throughput of the crusher.
Inspection screening refers to the screening after the ore has been crushed. The purpose is to ensure that the final crushed product meets the particle size requirements of the grinding operation, and the unqualified crushed product is returned to the crushing operation, such as before the medium and fine crusher. Screening, which plays the role of pre-screening and screening. Therefore, screening and screening can improve the utilization of the crushing equipment, similar to the classifier and the grinding machine to form a closed loop operation to improve the grinding efficiency.
(3) Preparing for screening The purpose is to prepare for the next job. For example, the re-election plant should sift and classify the materials before jigging, and classify the coarse, medium and fine products into graded jigging.
(4) Selective screening If the distribution of useful components in the material varies greatly at each particle level, it can be sieved and classified to obtain different particle sizes, and the low-quality particles are screened out, thereby correspondingly improving the grade of the material. . For example, the fine sieving of some iron concentrate re-grinding has the function of selective sieving, and the sieving can improve the grade of iron concentrate.
(5) Dewatering screening to remove the moisture from the material.
(6) Desizing Screen The sieve for removing fine particles in the material.
The device has high accuracy, high efficiency, high rigidity, and high reliability. It can be used to drilling(blind hole, chamfer) connecting plates, foundation plates, end panels, templates, flanges, structural components and other parts in steel structures, bridge building, power communication tower, heat boiler, and etc.
This machine is mainly composed of movable gantry, base, worktable, support frame, movable support, left/right bracket, servo slide power head, automatic chip conveyor, circulation cooling device and electrical system etc.
This machine is mainly used for drilling connecting plates of buildings, bridges, steel towers and other steel structures. The machine with double exchangeable worktables can clamp 4 work-pieces at the same time, with fast hydraulic grippers all around. Chip removal automatically, cooling liquid recycling used. Drilling head has stroke self-controlled function, it can automatically convert from fast feeding to normal feeding without setting the thickness of work-piece and the length of the drilling head. Electrical control adopts upper computer plus PLC control, direct conversion of CAD/CAM.
Boiler Drilling Machine,CNC Boiler Drilling Machine,Boiler Barrel Drilling Machine,High Speed Boiler Drilling Machine
Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com