1 tube dryer - corn pulp protein drying
The project was done very well. The consumption of steam per kilogram of dewatered water was only 1.2 kilograms, and the common type of tube dryers of the same type could only reach 2,000 kilograms per hour. The large drying plant in Tieling City used German technology to enter and exit the steam. The shape and distribution of the shovel and the jet technology have been improved so that the tube dryer can reach nearly 3000 kg/h. The dried material is corn pulp protein, and the water removal rate is about 50%.
2 Rotary Flash Dryer--Diatomite Drying
This project is a large drying plant only provides the host, the customer according to the manufacturer's system requirements, configure the gas furnace, cyclone, cloth bag and so on. Due to the large amount of sand in the diatomaceous earth, the dryer has been greatly modified according to the characteristics of the material. From the point of view of use, it is better than the previously used rotary dryer (the customer calls it roller). Many, do not have to shut down daily maintenance, and can also be reduced by nearly 30kw.
3 vibration multi-layer fluidized dryer--T501 drying
The T501 material is very difficult and has temperature limitations. Vibration fluidized bed dryers are generally used, but the fluidized bed dryer has a large footprint and high energy consumption. The Yuanda Drying Equipment Factory adopted a vibration multi-layer fluidized dryer. It has an area of ​​only 20 square meters, energy consumption is only 15kw, and can reach 300kg per hour.
The project was done very well. The consumption of steam per kilogram of dewatered water was only 1.2 kilograms, and the common type of tube dryers of the same type could only reach 2,000 kilograms per hour. The large drying plant in Tieling City used German technology to enter and exit the steam. The shape and distribution of the shovel and the jet technology have been improved so that the tube dryer can reach nearly 3000 kg/h. The dried material is corn pulp protein, and the water removal rate is about 50%.
2 Rotary Flash Dryer--Diatomite Drying
This project is a large drying plant only provides the host, the customer according to the manufacturer's system requirements, configure the gas furnace, cyclone, cloth bag and so on. Due to the large amount of sand in the diatomaceous earth, the dryer has been greatly modified according to the characteristics of the material. From the point of view of use, it is better than the previously used rotary dryer (the customer calls it roller). Many, do not have to shut down daily maintenance, and can also be reduced by nearly 30kw.
3 vibration multi-layer fluidized dryer--T501 drying
The T501 material is very difficult and has temperature limitations. Vibration fluidized bed dryers are generally used, but the fluidized bed dryer has a large footprint and high energy consumption. The Yuanda Drying Equipment Factory adopted a vibration multi-layer fluidized dryer. It has an area of ​​only 20 square meters, energy consumption is only 15kw, and can reach 300kg per hour.
Stainless Steel Special Adhesive
Stainless steel special adhesive,silicone adhesive factory,silicone adhesive glue factory
Shandong Gufeng Technology Co., LTD , https://www.gfkjgs.com