1.Electric hydraulic pump can be used as a variety of hydraulic equipment hydraulic pump.
2. After the electric hydraulic pump and other hydraulic tools are equipped, it can carry out a great deal of work such as lifting, pressing, bending, bending, aligning, shearing, assembling and disassembling. Reduce labor intensity, improve work efficiency.
Electric hydraulic pump Usage:
Open the bleed nut when using, open the switch on the oil collecting block, plug in the power supply, and fasten the quick connector on the quick head equipped with hydraulic equipment. Press the power switch, until the motor rotates 1-2 minutes, the switch is closed at the supercharged state, the hydraulic oil output at this time will carry out various tasks, the output hydraulic oil with the increase of load self-pressurization of the work until 63MPA .
After the work, open the switch to unload until the hydraulic oil back to the end, remove the quick connector sleeve, spin a good deflated nut, unplug the power, the switch off.
Electric hydraulic pump maintenance precautions:
1. The pump uses 20 oil.
2. Oil storage capacity must be within the oil window range.
3. Each refueling and oil change, must be more than 80 mesh filter oil filter, replace the need to wash the fuel tank. Oil change period of six months.
4. Working oil temperature 10 degrees Celsius to 50 degrees Celsius.
5. Before starting the electric pump, open the bleed nut and open the switch to unload position.
6. The process of using the motor temperature is too high, should be discontinued. Self-cooling before use.
7. The pump has been adjusted before leaving the factory, not free high-profile, to be readjusted, you must use the pressure gauge.
8. High-pressure tubing factory, after 105MPA test. However, due to easy aging hose, so the user should always check, usually six months, frequent use for three months, check 87.5MPA pressure test, if damaged, raised, leakage can not be used.
9. Bearings are generally cleaned once every six months, the assembly need to add grease.
Product Description
I. Some Features of XY-4-3A Drillng RigNew Condition Core Sample drill
1. Power can be electrical motor or diesel engine, as per your project needs;
2. Engine and Mud Pump,Reduction gears and Drill rig are all installed on one base, more compact structure and improve the overall rigidity;
3. Mounted in 2-wheel trailer,easy to move around when working;
4. Easy to disassemble,installed and operation, the Heaviest part is less than 100KG, convenient for maintenance and transport;
5. Using alloy bit for soft ground,using diamond bits for hard ground.
II. Customers
This hydraulic drilling rig has been successfully sold to Kenya, Peru, Chile, South Africa, Haiti, Congo, Philippines, Malysia, Gabon, Kenya, Columbia, Russia, Uganda, Panama, etc. Some of them are for personal use, some to do engineering, some trading companies. Namibia customers are used to do charity for poor children wells, we give him a big discount without any profit. You are welcomed to visit our company and factory at any time!
Xy-4-3A Drillng Rig,Drilling Machine,Drillng Rig,Engineering Drilling Rig
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrilling.com