The sweeping vehicle is equipped with a vertical swash plate and a height-adjustable suction nozzle device on the left and right sides, and a spray bar with multiple high-pressure washing nozzles is arranged inside the suction nozzle. In the process of sweeping the road, the sweeper, nozzle, and high-pressure nozzle work together to instantaneously suck the pavement sand and large garbage into the dustbin of the body. At the same time, the spraying device set on the side of the sweeper can effectively kill the Dust in the process of cleaning. The sweeper adopts advanced PLC intelligent control and one-button operation start-stop operation, which can quickly and easily achieve 9 kinds of operation modes such as full-sweeping, left-sweeping, right-sweeping, full sweeping, left sweeping, and right sweeping. . The car also has a high liquid level alarm protection function and self-cleaning function. When the sewage level in the garbage can reaches the specified height during operation, the protection system will automatically shut down the operation mechanism and continue the operation after the water is drained. The self-cleaning function assists in unloading and cleaning the interior of the bin when it is unloaded.
SMJ5160TXSD4 type sweeping vehicle has strong suction and high efficiency. Its total operation width is more than 3.5 meters. It is mainly used for the mechanized cleaning operation of urban roads, highways, squares, airports, docks, tunnels, bridges and isolation walls. It is a cleaning and cleaning system. Spraying dust in a high-end road cleaning equipment, technical performance has reached the leading domestic level. ( Click to enter the online purchase of stone coal machine page )
Anti-bending connector is a special connecting tool for overhead transmission line stringing construction, which is used to link guide rope and traction rope in the traction and laying process. The anti-bending connector does not damage the rope, and can bear large bending moment without deformation and damage under rated load. It can pass the traction machine drum and tension wheel of the tension machine, as well as various paying off pulleys. It has the characteristics of small volume, light weight, high strength, round shape, convenient assembly and disassembly.
The anti-bending connector bears the tension through the U-ring and the bolt pin shaft covered with a stick to connect the two ends of the traction rope and insert the lock catch. It is made of high-strength alloy steel by integral forging and heat treatment. Its material has excellent tensile and bending resistance. Its external dimension is short and compact. When it bears radial load, the force arm is short and the bending moment is small.
Points for attention:
1. It is forbidden to overload the anti-bending connector.
2. Before using the anti-bending connector, check and confirm that all parts are in good condition.
3. When the anti-bending connector is used, the roller must be installed, the pin of the acid complex shaft should be tightened, and it can swing flexibly after connection.
4. The anti-bending connector shall not be mixed with corrosive articles to avoid corrosion.
Anti-Bending Connector,U-Shape Anti-Bending Conncetor,U-Shape Conncetor,U-Shaped Fixed Connector
Taizhou Haoxin Electric Power Machine Co., Ltd. , https://www.hxstringingequipments.com