Unloader use matters needing attention
1. Connect the gas source interface, and check whether the interface is blocked by foreign matter, and ensure that the interface is clean and smooth;
2. Before using the star unloader, be sure that the rotation direction of the rotor is clockwise (view from the reducer out of the shaft end, which is consistent with the arrow on the sprocket cover);
3. Before using the star unloader, open the sprocket cover to check the tension of the chain. During the operation, check the chain periodically. Apply the appropriate grease to the chain and sprocket.
4. During the entire use of the unloader, it is advisable to adjust the pressure reducing valve so that the pressure at the seal is greater than the material pressure in the valve body of 0.05 MPa. The gas is oil-free and dry compressed air.
5. During the entire use of the star unloader, the gas source at the seal is always present, and the gas source can only be turned off after it is confirmed that the valve is out of service;
HONGQI INSTRUMENT (CHANGXING) CO.,LTD , https://www.hongqi-instrument.com