1)Material of valve: SUS304/SUS316L, AISI304, AISI316L
2)Size: DN20-DN150/1"-6"
3)Standard of valve: DIN, 3A, ISO/IDF, BS/RJTASME/BPE,SMS
4)Material of seal: Silicone/VMQ/EPDM/FPM FDA117.2600
5)Connection mode: Weld/clamp/thread/flange/union
6)Certification: Material inspection report
7)Power: Pulling handle/multi-position plastic handle/multi-position stainless steel handle/electric actuator/pneumatic head
8)Three type of actuator: Normally open(NO), normally closed(NC), Air/Air(A/A)
9)Work principle: This kind of valve can be handled by manual or an electric actuator, and also can be handled by a pneumatic actuator.Â
10)Medium: Food, beverage, dairy, pharmacy.Â
11)certification: Metallurgical tests&pressure tests.Â
As a manufacturer, We can customize and design according to the customer's requirement if the specification is out of our standard.
Don't hesitate to contact us if you need more details or catalogue.
| Â Technical Data | Â | Â | Â |
| Â Material | Â Contact with the product components | Â 304/316L(1.4306/1.4404) | Â Can provide material inspection report |
| Â | Â Materal no contact with the product components | Â 304(1.4301) | Â Can provide material inspection report |
| Â Sealing material | Â Standard | Â silicone | Â Adopt sealing material with all the seal material the FDA 117.2600 |
| Â | Â Option | Â EPDM/FPM | Â Adopt sealing material with all the seal material the FDA 117.2600 |
| Â Pressure | Â Pressure of work | Â Â 0-10 bar | Â |
| Â | Â Control air pressure | Â Â 5-8 bar | Â |
|  Temperature |  Working temperature |   Silicone:(-50~+180ºC) EPDM(-20~+135ºC) FPM(-30~+230ºC) |  |
|  |  sterilization temperature |  150ºC(Max 20min) |  |
|  Surface treatment |  Inside surface treatment | Ra≥0.4-0.8μm |  |
|  |  Surface treatment |  Ra≥0.8-1.6μm |  |
|  Connection |  The diameter welding | DIN11850-2,DIN11850-1,3A,SMS,ISO,IDF,BS.... |  |
|  |  Connection mode: | weld, triclamp,thread,flange,union,nut,etc |  |
| Â Optional driven | Â Brainpower | Â | Â |
|  |  Pneumatic control | Pneumatic head and fixed bracket |  |
| Manual handle mode | pulling handle (round puling handle, square pulling handle) |  Multi-position handle(stainless steel&plastic) |  American type stainless steel stainless steel multi-position handle |
MH slurry pump is single stage, cantilevered, horizontal, centrifugal High Pressure Slurry Pump. The MH High Head Slurry Pump is specifically designed to combat the need to run conventional design slurry pumps at excessive speeds to generate high heads and high efficiency often required in many modern slurry pumping applications used as the filter press feeding pump, SAG Mill Discharge Slurry Pump and Wet Crusher Slurry Pump etc.Single pump unit rather than series pumping can be adopted, at greatly reduced capital cost, while still offering optimum wear life and efficiency.
Pump Features
-High chrome alloy liners provide superior abrasion resistance & erosion resistance and maximum wear life
-Large diameter, high efficiency impellers designed to meet high head requirement, maximum wear life and low operating cost
-High head & high pressure
-Discharge branch can be positioned at intervals of 45 degrees
-The pump can be installed in multi-stage high pressure operation
-Easy to maintain
Application Range:
Discharge Size:1" to 6"
3 Capacity:16 to 1125 m /h
Head:12 to 95 m
Slurry Booster Pump,High Head Slurry Pump,High Efficiency Slurry Pump,Flotation Copper Slurry Pump
SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com