Valve type: Non-rising stem resilient soft seat.
Applicable size: DN50 to DN900
Applicable pressure: PN10, PN16
Design standard: DIN 3202
We also can offer DIN3202 F5/ BS5163 series gate valve.
Operator method: Electric, pneumatic, hydraulic actuator and worm wheel. Please contact us directly for more information.
1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron GGG500-7
B) Wedge: DI, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel,Brass
E) Gasket: NBR
F) Bonnet: GGG500-7
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
| DN | L | H | DINÂ PN10/16 | C | weight | |||||||
| mm | inch | Ø1 | Ø2 | n×Ø | ||||||||
| 40 | 1"1/2 | 140 | 285 | Ø150 | Ø110 | 4-Ø18 | 17 | 9.5kgs | ||||
| 50 | 2" | 150 | 300 | Ø165 | Ø125 | 4-Ø18 | 18 | 12.5kgs | ||||
| 65 | 2"1/2 | 170 | 345 | Ø185 | Ø145 | 4-Ø18 | 18 | 15.5kgs | ||||
| 80 | 3" | 180 | 390 | Ø200 | Ø160 | 4/8-4-Ø18 | 18 | 21kgs | ||||
| 100 | 4" | 190 | 460 | Ø220 | Ø180 | 8-Ø18 | 19 | 27kgs | ||||
| 125 | 5" | 200 | 510 | Ø250 | Ø210 | 8-Ø18 | 19 | 35kgs | ||||
| 150 | 6" | 210 | 565 | Ø285 | Ø240 | 8-Ø22 | 19 | 56kgs | ||||
| 200 | 8" | 230 | 680 | Ø340 | Ø295 | 8/12-Ø22 | 22 | 80kgs | ||||
| 250 | 10" | 250 | 820 | Ø395/Ø405 | Ø350/Ø355 | 12-Ø23/Ø26 | 22 | 120kgs | ||||
| 300 | 12" | 270 | 930 | Ø445/Ø460 | Ø400/Ø410 | 12-Ø23/Ø26 | 26 | 175kgs | ||||
| 350 | 14" | 290 | 1020 | Ø505/Ø520 | Ø460/Ø470 | 16-Ø23/Ø26 | 30 | 186kgs | ||||
| 400 | 16" | 310 | 1100 | Ø656/Ø580 | Ø515/Ø525 | 16-Ø26/Ø30 | 30 | 280kgs | ||||
| 500 | 20" | 350 | 1250 | Ø670/Ø715 | Ø620/Ø650 | 20-Ø26/Ø33 | 32 | 350kgs | ||||
| TECHNICALÂ DATA | Â | Â | Â | Â | Â | Â | Â |
| NOMINALÂ DIAMETER | DN40-DN500 | mm | |||||
| NOMINALÂ PRESSURE | 1.6 | Mpa | |||||
| TESTINGÂ PRESSURE | SHEELÂ TEST | 2.4 | |||||
| Â | Â | Â | Â | Â | |||
| SEALINGÂ TEST | 1.76 | ||||||
Crankshaft is the core of the power end, it is the key transmission components of mud pump, more an important safety component. Crankshaft must have sufficient rigidity and fatigue strength. Therefore, the crankshaft is made of ZG35CrMoRe through precision casting. The material has an excellent mechanical properties after post-strengthening treatment. High strength, toughness and fatigue resistance, improves the service life of the crankshaft. To reduce the weight, The crankshaft is hollow. The three throws on crankshaft are equipped with eccentric bearings, the connecting rod big end is mounted on the eccentric Bearing. The crankshaft rotation drives the connection rod to come true reciprocating motion.
Crankshaft Assembly,High Performance Crankshaft,Auto Crankshaft Assembly,Truck Crankshaft Assembly
Baoji Baohao Petroleum Machinery Equipment Co., Ltd. , http://www.baohao-petro.com