According to the "Opinions on Strengthening and Improving Motor Vehicle Inspection Work" issued by the Ministry of Public Security and the State Administration of Quality Supervision (hereinafter referred to as "Opinions"), from September 1st, all provinces and municipalities will try to exempt passenger vehicles such as non-operating cars from inspection within 6 years. policy.
The reporter learned from the Zhongshan Public Security Traffic Police Detachment yesterday that the detachment has issued the "Notice on the Work of the City to Exempt the Inspection and Qualification Marks for the Exemption of Vehicles within 6 Years" to inform the general public that Zhongshan City will comply with the "Opinions" and the provincial public security. From September 1st, the deployment of the hall will implement the exemption policy for passenger cars such as non-operating cars within six years, and will also clarify the types of passengers involved in casualties, vans, 7 and more, and more than 4 years of unregistered. The car is still inspected according to the original regulations. At present, the relevant departments of the Municipal Traffic Police Detachment are embarking on preparatory work.
The current "Road Traffic Safety Law" and its implementation regulations stipulate that small private cars should be inspected once every two years in six years, once every year in six to fifteen years, and once every six years after 15 years. According to the "Opinions" requirements, starting from September 1 this year, non-operating cars and other small and micro passenger cars registered after September 1, 2010 (inclusive) will be exempted from inspection within 6 years, but still need to be 2 In the year, the traffic police department applied for an inspection mark.
The reporter learned from the Municipal Public Security Traffic Police Detachment that the number of inspections exempted from inspections is: the vehicle with the registration date after September 1, 2012 (inclusive) can be exempted from the inspection twice; the registration date is 2010 9 Between the 1st of the month (inclusive) and the August 31st, 2012 (inclusive), since it has been inspected once, the policy of exemption from inspection can be applied; the registration date is before August 31, 2010, and it is still executed. Original inspection requirements.
However, if there is a casualty accident in the above-mentioned vehicles within six years, the van, the 7-seat and the 7-seat vehicles, and the registration procedures that have not been registered for more than 4 years from the date of ex-factory, which were overdue before September 1 this year, 2010 Private passenger cars registered before August 31 of the year still need to be inspected according to the original regulations.
The relevant person in charge of the traffic police detachment pointed out that the van that can not enjoy the exemption policy refers to the flat or short head body structure, single-layer floor, engine center (refers to the arrangement of the engine block as a whole between the front and rear axles of the car), aspect ratio (refers to the ratio of vehicle width to vehicle height) less than or equal to 0.90, the number of passengers is less than or equal to 9 passengers, passenger cars with seats installed.
It is understood that when the exempted vehicles are subject to regular annual review within 6 years of registration, they no longer need to go to the motor vehicle inspection station to pass the line inspection, submit the relevant information directly to the traffic police department and pass the verification and pass the inspection certificate. Pay any fees.
When issuing the inspection mark, the traffic police department only reviews the motor vehicle inspection mark application form, motor vehicle driving license, motor vehicle traffic accident liability compulsory insurance certificate, vehicle and vessel tax payment or tax exemption certificate, and verifies traffic safety violations and traffic accident handling. If it meets the requirements, it will issue an inspection mark.
Molybdenum can increase steel`s corrosion resistance in the acid-based solutions and liquid metals, thus improve its wear resistance, hardenability, weldability, and heat resistance. As an element which easy to form carbides, molybdenum can effectively avoid oxidation during steel making process, and it can be used alone or mix with other alloy element to achieve the best performance.
High temperature smelting additives
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcalloypowder.com