Introduction: Excavators, also known as excavating machinery, use buckets to excavate materials above or below the surface of the carrier and load it into transport vehicles or earthmoving machinery that is unloaded into the stockyard. The earth excavation and loading are mainly carried out and can be carried out. Land leveling, slope repair, lifting, crushing, demolition, ditching and other operations.
Excavators, also known as excavating machinery, excavate materials above or below the surface of the plane with buckets and load them into transport vehicles or earthmoving machinery that is unloaded into stockyards. They mainly excavate and load earth and stone, and can also perform land leveling. , slope repair, lifting, crushing, demolition, ditching and other operations.
The main working device of mine excavators is a positive shovel. Individual shovels and lifting devices are equipped. The bucket capacity is relatively large. Usually 2 to 20M3 is now popularized for hydraulic control and control. It is mainly used for loading operations after mining. .
Classification 1, according to the drive classification: divided into internal combustion engine driven excavator, electric driven excavator 2, according to the operation process classification: divided into single bucket excavator (cycle operation), multi bucket excavator (continuous operation)
3, according to transmission classification: divided into hydraulic excavators, mechanical excavators top ten brands:
KOMATSU, HITACHI, Caterpillar, VOLVO, DAEWOO, HYUNDAI, KOBELCO, CASE, DFH, Atlas (ATLAS).
Our robots used to match all processing machines to realize fully or semi Automatic Production Line for stainless steel hardware, such as dish, bowl, cup, pot, pan, cover, basin etc.. The production quality is stable and best due the steel products can soak drawing-liquid or paste oil to obtain the protection for the drawing tension of stainless steel in the processing and shape perfect. Also it can be annealed for better result for quality and shape. And the groove and diameter changing of products can be safely done by the automatic feeding and discharging from the beader and trimmer.
For the annealing line include the conveyor, Annealing Robot, annealinng machine, cooling conveyor system, to be connected after the puch press for the automatic production line.
The annealing robot has two type: JST-400 and JST-600 for choice.
Automatic Annealing Line for Hardware Production Line
Automatic Feeding and Discharging Robot,Annealing Robot,Hardware Production Line,Automatic Feeding Robot,Automatic Discharging Robot
Shantou Sunshine Automation Equipment Co.,Ltd. , http://www.stjsrobot.com