Model NO.: Customized
Factory Visit: Welcome
Volume: 9.4
Reducer: Jzq350
Thickness: 8mm
Weight: 5.7t
Fan Power: 5.5kw
Yield: 1-4t
Power: 7.5kw
Structure: Rotary Type Drier
Operational Method: Continuous
Appearance of Dried Sample: Bulk
Type of Flow: Contra-Flow
Type of Atomization: Pressure Atomization
Sprayer: Air-Flowing Type
Trademark: Hongke
Transport Package: Standard Export Package, Suitable for Sea Shipping
Specification: 1 * 12m
Origin: Zhengzhou, Henan, China
HS Code: 8419399090
Features of  large three drum rotary dryer Large three drum rotary dryer uses new type of feeding and discharging devices, which puts an end to the uneven feeding jams and discontinuous return of slag drier, and reduces the dust load on the system. Innovation on the internal structure is implemented, which strengthens the cleaning and heat transfer of decentralized materials, eliminating the dip-sticking to the cylinder wall.
Â
Working principle of  large three drum rotary dryer
1.Material is sent to hopper through belt conveyor or bucket conveyor, and then charger enters into feeding end through feeding pipe.
2. Indication of feeding pipe should be more than crater angle of material so that material is smoothly flowed into dryer.
3. Dryer cylinder is slightly leaned to horizontal line. Material is added from upper end, while heat-carrying agent is entered from lower end, forming counter-current contact with material. Sometimes heat-carrying agent and material are flowed into barrel.
4. With rotation of cylinder, material runs to upper end upper gravity action. When moist material is moved forward in barrel, it directly and indirectly gained supply of heat-carrying agent so that moist material can be dried and sent through belt feeder or screw conveyor in discharging end.
5. Inner wall of slag dryer barrel is equipped with lifting board. Its function is to lift material and spread increase contact surface of material and air flow so as to improve drying rate and accelerate material.Â
6. After heat-carrying agent is dried, cyclone dust collector shall gather material carried by gas (heat-carrying agent is generally divided into hot air and fuel gas).
For further reduction of tail gas dust load, it can be discharged after passing bag-type collector or wet collector.
Â
Specification and technical parameters
Φ 0.8 × 8 | 4 | JZQ350 | 8 | 3.2 | 4 | 4 | 0.5-2 |
Φ 0.8 × 10 | 5 | JZQ350 | 8 | 3.7 | 4 | 4 | 0.5-2.5 |
Φ 1 × 8 | 6.3 | JZQ350 | 8 | 4.5 | 5.5 | 4 | 1-2.5 |
Φ 1 × 10 | 7.9 | JZQ350 | 8 | 5.2 | 5.5 | 5.5 | 1-3 |
Φ 1 × 12 | 9.4 | JZQ350 | 8 | 5.7 | 7.5 | 5.5 | 1-4 |
Φ 1.2 × 10 | 11.3 | JZQ400 | 10 | 9 | 11 | 7.5 | 1-4.5 |
Φ 1.2 × 12 | 13.6 | JZQ400 | 10 | 10 | 11 | 7.5 | 1-4.8 |
Φ 1.2 × 14 | 15.8 | JZQ400 | 10 | 11 | 11 | 7.5 | 1-5 |
Φ 1.2 × 16 | 18 | JZQ400 | 10 | 12 | 11 | 7.5 | 2-6 |
Φ 1.5 × 12 | 21.2 | JZQ500 | 12 | 14.4 | 11 | 7.5 | 2-9 |
Φ 1.5 × 14 | 24.7 | JZQ500 | 12 | 15.6 | 15 | 11 | 2-9.5 |
Φ 1.5 × 16 | 28.3 | JZQ500 | 12 | 16.8 | 15 | 11 | 2-10 |
Φ 1.8 × 14 | 35.6 | JZQ500 | 16 | 23 | 18.5 | 15 | 5-11 |
Φ 1.8 × 16 | 40.7 | JZQ500 | 16 | 24.5 | 18.5 | 15 | 5-12 |
Φ 1.8 × 18 | 45.8 | JZQ500 | 16 | 26 | 18.5 | 15 | 5-13 |
Φ 2 × 18 | 56.5 | JZQ650 | 18 | 31 | 22 | 18.5 | 5-15 |
Φ 2 × 20 | 62.8 | JZQ650 | 18 | 33 | 30 | 22 | 5-16 |
Φ 2 × 22 | 69 | JZQ650 | 18 | 35 | 30 | 22 | 5-17 |
Φ 2.2 × 18 | 68.3 | JZQ650 | 20 | 38 | 30 | 22 | 8-18 |
Φ 2.2 × 20 | 75.9 | JZQ650 | 20 | 42 | 30 | 22 | 8-19 |
Φ 2.2 × 22 | 83.5 | JZQ650 | 20 | 46 | 30 | 22 | 8-20 |
Φ 2.2 × 24 | 91.1 | JZQ650 | 20 | 50 | 30 | 22 | 8-21 |
Φ 2.4 × 16 | 72.3 | JZQ650 | 22 | 45 | 37 | 30 | 10-20 |
Φ 2.4 × 20 | 90.4 | JZQ750 | 22 | 51 | 45 | 37 | 10-22 |
Φ 2.4 × 24 | 108.2 | JZQ750 | 22 | 60 | 55 | 37 | 10-25 |
Φ 2.4 × 28 | 126.6 | JZQ750 | 24 | 67 | 75 | 55 | 10-30 |
Φ 2.7 × 18 | 1.03 | JZQ750 | 24 | 55 | 75 | 55 | 15-25 |
Φ 2.7 × 24 | 137.3 | JZQ750 | 24 | 68 | 75 | 55 | 15-30 |
Φ 3 × 20 | 141.3 | JZQ900 | 25 | 81 | 75 | 55 | 25-30 |
Φ 3.2 × 20 | 160 | JZQ900 | 25 | 95 | 90 | 55 | 25-35 |
Φ 3.2 × 28 | 225 | JZQ900 | 25 | 101 | 90 | 75 | 25-40 |
Φ 3.5 × 24 | 230 | JZQ900 | 25 | 120 | 110 | 75 | 30-50 |
FAQ
1.What is the raw material do you want to process?
2.What is the capacity per hour do you need?
3.What is the raw material input size?
4.What is the output size of you product?
Â
Our engineers will suggest you the most suitable one for you according to your information.
We will give you factory price with full specification,so pls leave us an inquiry to know more details about price,packaging shipping and discount.
Now,please click the following contact to send us email for best offer and more details!
Â
↓↓↓
Â
Web:www.rotarykilnhk.com
Henan Hongke Heavy Machinery Co.,ltd
Tel Fax:86-371-68617124
Phone:86-15236618748
Â
Â
Auto Parts, Custom Auto Parts,CNC Machine Auto Spare Parts
Ningbo Jiongke Technology Co., Ltd , https://www.precisioncncmachiningparts.com