Marine Sewage Treatment System for 8-12 Persons

SWCM-10 marine sewage treatment system meests: 
1. Steel seagoing vessel classification rules (CCS)
2  GB10833-89       Marine sewage treatment system specification
3  GB2506-2005       Marine pipe flanges Connection dimensions and mating face
4 GB/T13306-1991       Name plate
5 Annex  IV of MARPOL 73/78
6 IMO.MEPC.159(55)Resolution  

SWCM-10 Marine Sewage treatment system constitution:
This sewage treatment system mainly constituted by aeration tank, contact oxidation tank, settling tank, membrane tank, cutting pump, air pump, discharge pump, electric control box, membrane module, UV sterilizer and accessories of pipe lines.

Main technical characteristic of SWCM-10 Marine Sewage treatment system:
Capacity: Rated capacity: 10 persons         
Average treatment load: 700L/d
Discharge standard: The discharge water should meet the requirements of IMO MEPC.159(55) resolution.
TSS≯35mg/l  BOD5≯25 mg/l  COD≯125 mg/l   Coliform ≯100PCS/100ml      pH=6~8.5
Discharge water pressure: 0.15 MPa   Ambient temperature:5~50ºC        Relative humidity:≤95%
Discharge style: Automatic discharge  
Outline dimension: L×B×H≈1160×1150×1350 mm
 Power: 5. 5KW
 Operating and maintenance space ≥600mm (surface)
The main body of this marine sewage treatment system is made of Q235-B steel plate.
Sand blast and anticorrosion coat the pipe support, stand, main body and other spare parts.
Sand blast the device surface to reach Sa2.5 grade. The paint of internal wall which contacts with sewage is epoxy tar paint.  Protection grade: Electric control box IP44   Motor IP44   Insulation grade of motor: F
SWCM-10 Marine Sewage treament systme equipment list
  Spare parts of this treatment system:    Warranty period is one year after delivery of vessel from shipyard. During warranty period, if there are troubles owning to the design or quality, factory should give a free maintenance or replacement.

 
  SWCM-10 marine sewage treatment system meests: 
1. Steel seagoing vessel classification rules (CCS)
2  GB10833-89       Marine sewage treatment system specification
3  GB2506-2005       Marine pipe flanges Connection dimensions and mating face
4 GB/T13306-1991       Name plate
5 Annex  IV of MARPOL 73/78
6 IMO.MEPC.159(55)Resolution  

SWCM-10 Marine Sewage treatment system constitution:
This sewage treatment system mainly constituted by aeration tank, contact oxidation tank, settling tank, membrane tank, cutting pump, air pump, discharge pump, electric control box, membrane module, UV sterilizer and accessories of pipe lines.

Main technical characteristic of SWCM-10 Marine Sewage treatment system:
Capacity: Rated capacity: 10 persons         
Average treatment load: 700L/d
Discharge standard: The discharge water should meet the requirements of IMO MEPC.159(55) resolution.
TSS≯35mg/l  BOD5≯25 mg/l  COD≯125 mg/l   Coliform ≯100PCS/100ml      pH=6~8.5
Discharge water pressure: 0.15 MPa   Ambient temperature:5~50ºC        Relative humidity:≤95%
Discharge style: Automatic discharge  
Outline dimension: L×B×H≈1160×1150×1350 mm
 Power: 5. 5KW
 Operating and maintenance space ≥600mm (surface)
The main body of this marine sewage treatment system is made of Q235-B steel plate.
Sand blast and anticorrosion coat the pipe support, stand, main body and other spare parts.
Sand blast the device surface to reach Sa2.5 grade. The paint of internal wall which contacts with sewage is epoxy tar paint.  Protection grade: Electric control box IP44   Motor IP44   Insulation grade of motor: F
SWCM-10 Marine Sewage treament systme equipment list
  Spare parts of this treatment system:    Warranty period is one year after delivery of vessel from shipyard. During warranty period, if there are troubles owning to the design or quality, factory should give a free maintenance or replacement.

 
 

Injection Mould

At the same time, our company has established an advanced CAD/CAM/CAE system and a centralized management system to realize the sharing and high-speed transmission of information resources within the company, which greatly improves the integration process of mold design and processing, and provides a variety of high, precise, The design and manufacture of tip molds provide a strong guarantee. The company produces 600 sets of molds annually.

Ergonomic operations thanks to wide range of different clamping systems
Short cycle times and high productivity thanks to machine versions with various rotary tables and sliding tables
Servo-electric rotary tables for precise and reliable processing of delicate inserts
Simple integration into automated production lines
Particularly space-saving, compact design

Injection Mould,Charger Injection Mould,SB Data Injection Molder

Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.zanyangmachine.com