In recent years, we have seen the rapid development of science and technology in our great motherland. This made me feel extremely proud for me as a Chinese. With the advancement of technology and the progress of people, we will join the Chinese cutting machine trading network to make progress together. Join the hotline, we look forward to your call. Details:/
Laser cutting machine use more attention, but keep in mind that this knowledge is a prerequisite for efficient use of the following Dahan laser laser cutting machine for everyone to introduce the lens cleaning method, we can compare, and their usual clean-up method is the same, if Not the same as remember to correct.
The first step is to use a blower to blow off the float on the surface of the original, especially the lens with tiny particles and flocs on the surface. This step is necessary. But do not use compressed air on the production line, because these air will contain oil mist and water droplets, which will increase the pollution of the lens.
In the second step, the lens was slightly cleaned using pure acetone. This grade of acetone is almost anhydrous, which reduces the possibility of lens contamination. The cotton ball must be cleaned with acetone in the light and the ring moved. Once the swab is dirty, it must be replaced. Cleaning should be done at one time to avoid ripples.
If the lens has two coated surfaces, such as lenses, each side needs to be cleaned in this way. The first side needs to be put on a layer of clean lens paper for protection.
If acetone can't remove all the dirt, then wash it with vinegar. In vinegar cleaning, the dirt is removed by dissolving the dirt, but it does not damage the optical lens. The vinegar can be of experimental grade (diluted to 50% strength) or white vinegar with 6% acetic acid for home use. The procedure for cleaning is the same as for acetone, and then acetone is used to remove the vinegar and dry the lens. At this time, the cotton balls must be replaced frequently to completely remove the acid and hydrate. Until it is clean.
When the contaminants and lens damage cannot be removed by cleaning, especially if the film is burned due to metal splashing and dirt, the only way to restore good performance is to replace the lens.
Every technical information Dahan Laser provides for everyone has a very good summary and reference learning value, see more technical information, you can find in our news section area.
Editing: kunshanwl
Agricultural Machinery Disc details:
1.Diameter:12inch-44inch (300mm-1116mm.
2.Thickness:3mm-12.5mm
3.Material: 65mn spring steel
4.Hardness:38-46HRC
5.Type:smooth and notched
6.Technics: steel cutting, heat treatment, quenching, heat case-hardened and baking vanish
Agricultural Machinery Disc
Agricultural Machinery Disc, Agricultural Disc, Harrow Disc, Concave Disc, Farm Disc Blade
Ningbo Combine Machinery Co.,Ltd. , http://www.combine-harvester-parts.com