How to identify the advantages and disadvantages of voltage and current transducers

(1) When the primary side is overloaded, the output current does not exceed 25.000mA+10%, otherwise the 24V working power supply and A/D input clamping circuit used in the PLC/DCS for the transmitter are damaged due to excessive power consumption. The transmitter-to-output in the transmitter is also damaged due to excessive power consumption, and the A/D input clamp circuit is even more vulnerable.

(2) When the working voltage is 24V reversed, the transmitter must not be damaged and must have polarity protection;

(3) Whether or not the clamp voltage is detected when the induced surge voltage exceeds 24V: In the two-wire output port and an AC 50V pointer meter, use AC 50V to connect two wires to instantly touch the two-wire output port. Clamping, how many volts can be clamped at a glance;

(4) The identification of whether or not there is polarity protection: Use an analog multimeter to multiply the positive and negative of the 10K file to measure the two-wire output port. There is always an infinite resistance of Î©, and there is polarity protection;

(5) There is a long-term short-circuit protection of the electrodeless output current: when the primary input is 100% or when the overload is greater than 125%-200%, the load is short-circuited to 250Î© and the short-circuit protection limit is measured at 25mA+10%;

(6) Industrial level and civil commercial level discrimination: The industrial grade operating temperature range is -25 degrees to +70 degrees, the temperature drift coefficient is 100ppm per degree, that is, the temperature changes by 1 degree per degree, and the accuracy changes to one ten thousandth. Civilian commercial-grade operating temperature range is 0 degrees (or -10 degrees) to +70 degrees (or +50 degrees), temperature drift coefficient is 250ppm per degree, that is, temperature change per degree is 1 degree, precision changes to 10000 Two-fifth; temperature and voltage transmitter temperature drift coefficient can use the incubator or high and low temperature box to test more complex.

(7) When the voltage between the two lines due to induction lightning and induced surge voltage exceeds 24V, the transmitter must be clamped, and the transmitter must not be damaged; generally, 1-2 TVS transient protection diodes 1.5KE can be inhibited in parallel between two wires. The 20-millisecond pulse width of the positive and negative pulse of 20 seconds interval, the transient withstand impact power 1.5KW-3KW;

(8) The reference must be stable, 4mA is the corresponding input zero reference, the reference is unstable, and the linearity of the accuracy is not relevant. The zero offset of 4mA within 4 minutes of cold boot does not exceed 4.000mA0.5%; (ie, 3.98 -4.02mA), the pressure drop on the load 250Î© is 0.995-1.005V, the IC chip in foreign countries often uses the expensive energy gap reference, and the temperature drift coefficient varies by 10ppm per degree;

(9) The total current consumption of the internal circuit is <4mA, equals to 4.000mA after setting, and the active rectifier filter amplifies the constant current circuit, and the consumption current of the active current rectifying filter amplifies the constant current circuit also changes. The foreign IC chip adopts constant current power supply;

(10) When the working voltage is 24.000V, when the full scale is 20.000mA, the full-scale 20.000mA reading will not change due to the load 0-700Î©; the variation does not exceed 20.000mA0.5%;

(11) When the full-scale range is 20.000mA, when the load is 250Î©, the full-scale reading of 20.000mA will not change due to the change of the operating voltage 15.000V-30.000V; the change does not exceed 20.000mA0.5%;

(12) The linearity of the product marking 0.5% is the absolute error or the relative error, which can be discerned by the following method: At the same time, the following linearity is 0.5%. When the primary input is zero, the output is 4mA plus or minus 0.5. % (3.98-4.02mA) with a voltage drop of 0.995-1.005V at 250Î©

When the input of the primary side is 10%, the output is 5.6mA plus or minus 0.5% (5.572-5.628mA), and the load voltage at 250 ohms is 1.393-1.407V.

When the primary input is 25%, the output is 8mA plus or minus 0.5% (7.96-8.04mA), and the load voltage at 250Î© is 1.990-2.010V.

When the input voltage is 50% at the primary input, the output voltage is 12mA plus or minus 0.5% (11.94-12.06mA), and the load voltage at 250Î© is 2.985-3.015V.

When the primary input is 75%, the output is 16mA plus or minus 0.5% (15.92-16.08mA). The load is 250mA with a voltage drop of 3.980-4.020V.

When the primary input is 100%, the output voltage is 20mA plus or minus 0.5% (19.90-20.10mA). The pressure drop across the 250Î© load is 4.975-5.025V.

(13) When the primary input is overloaded, it must be current-limited: When the primary input overload is greater than 125%, the output over-current limit is 25mA+10% (25.00-27.50mA). The pressure drop on the load 250Î© is 6.250-6.875V;

The above 13 methods can also be used to distinguish between the true and false advantages and disadvantages of other transmitters.

Electric Pallet Truck

Akodi produces various Electric Pallet Trucks. Our 1.5 ton Compact Electric Pallet Truck is cost-effective. This walkie electric pallet jack is ideal for delivery driver and a smaller warehouse operation. Our 2-ton Electric Pallet Jack is very popular around the world. It can be rider or walkie. This powered pallet jack has rigid construction and build to last.

Economical electric Pallet Truck

Smaller size: smaller turning radius, suitable for operation in confined space

DC motor drive system: high efficiency, and cost-effective

Multifunctional handle: ergonomics, comfortable operation, increased work efficiency

German import micro switch: adaptable in a variety of harsh environments

Maintenance free battery and external charger: easy for maintenance, better heat dissipation

Optional: water proof protection for electronic components

Measurement/ Model		SL15	SL15 low profile
Capacity (Q)	Kg	1500	1500
Load center (C )	mm	600	600
Turning radius (Wr)	mm	1440	1440
Max. height (h)	mm	200	180
Min. height (h1)	mm	85	65
Fork size	mm	150Ã—1150	150Ã—1150
Overall fork width (L1)	mm	560/685	560/685
Overall width (b1)	mm	560/685	560/685
Overall length (L)	mm	1624	1624
Overall height (h4)	mm	1174	1174
Climbing ability(no-load/full-load)	%	5/15	5/15
Driving Method		Walk	Walk
Drive motor		24V / 0.75KW	24V / 0.75KW
Battery Capacity		2x12V / 65 Ah	2x12V / 65 Ah
working hours once fully charged	h	3.5	3.5
weight	kg	150/190	145/185
battery weight	kg	40	40
Driving wheel	mm	Ï†210x70	Ï†210x70
Load wheel	mm	Ï†80x60	Ï†60x80

Electric pallet truck

Pull-rod design fork: reduces fork wear, eliminating costly fork repairs
Curtis control system and brushless AC motor: powerful, improved work efficiency, and reliability
Multifunctional handle: ergonomics, comfortable operation, increased work efficiency, break override feature
Shock-absorbing and anti-skid platform: comfortable standing for operation
Optional: electronic steering

Electric Pallet Truck

Measurement/ Model		AKCDH20	AKCDH30
Capacity (Q)	Kg	2000	3000
Load center (C )	mm	600	600
Turning radius (Wr)	mm	1570 (1715)	1570 (1715)
Max. height (h)	mm	205	205
Min. height (h1)	mm	82	82
Fork size	mm	160Ã—1220	160Ã—1220
Overall fork width (L1)	mm	550/680	550/680
Overall width (b1)	mm	775	775
Overall length (L)	mm	1956	1956
Overall height (h4)	mm	1415	1415
Travelling speed (no-load/full-load) controllable	km/h	5.8/5.5	5.8/5.5
Driving Method		Stand	Stand
Steering		Mechanical	Mechanical
Battery Capacity	V/Ah	24V / 210 Ah	24V / 270 Ah
External charger	V/A	DC24V/30A	DC24V/30A
working hours once fully charged	h	6 ~ 8	6 ~ 8
Weight	kg	380/420	445/485
Battery weight	kg	175	195

Electric Pallet Truck

Electric Pallet Trucks,Compact Electric Pallet Truck,Walkie Electric Pallet Jack,Electric Pallet Jack

Akodi Intelligent Robot Technology Co., LTD , https://www.akodiforklift.com