The hand-lifting drying rack is divided into manual and electric, and can be adjusted according to different heights to facilitate people's use.
The reason why electric vehicles are not popularized is due to the technical immaturity of the entire industry and the limitations of after-sales service. After all, they are mounted on the ceiling and are not as easy to remove, repair and maintain as small household appliances. At present, it is still manual (handshake) to dominate the market.
When installing a hand-lifting drying rack, basic structural knowledge must be mastered. Manual lifting racks need to understand the structure of lifting racks before installation?
The structure of hand-lifting drying racks is not complicated. There are five parts: hanging poles, wire ropes, hand cranks (controllers, core parts), steering gears, and top seats. Some lifting racks will also be equipped with hangers.
First, the drying rod: usually with two hanging rods, the material is mainly aluminum tubes, because the aluminum surface can do a variety of surface treatment (anodic oxidation, sandblasting, fog silver), make it look beautiful and decorative effect.
Second, the steel wire rope: Most of the wire rope of the drying rack is made of 202# stainless steel wire as raw material, and there are a few extremely high-grade 304# stainless steel wire to do it. The wire rope is divided into two parts, one part is connected to the hand crank. By shaking the handle, the wire rope can be wound into the hand crank and pulled out of the hand crank. This part belongs to the hand shaker. The other part is a wire rope that is connected to the handle and connected to the hand crank.
Third, the racks hand crank: hand crank is the most critical accessories drying racks, the market is relatively low-grade hand gear to the gear device, the higher the use of integrated spring lock process. Dr. Ju hand crank (patent number: ZL2004200881398) first warranty for five years, stamping-type one-time positioning technology to ensure accurate match, equal ratio rivet screw combination fastening technology balance; solid high-purity 26g alloy core durable durable; widen The bottom plate is even and steady; the solid thickened connecting rods; rivet-type locking handles are prevented from falling off; Great Wall top-grade lubricant is used at 10 times to ensure lubrication for more than five years.
4. Steering gear: The steering gear, also known as the universal wheel, is a device that is mounted on the wall and allows the wire rope to pass through the inner pulley and keep it perpendicular to the hand crank. The higher-grade product diverters are made of pure copper wheels.
Fifth, the top seat: is installed on the ceiling of the balcony, so that the wire rope through the internal pulley and vertical connection with the hanging rod and support all the weight of the device.
Here we introduce hand lifting racks installation techniques:
Lifting drying rack installation requires only one wall and one roof. If the balcony is roofless, push-pull drying racks can be selected. And then according to family conditions, personal preferences to choose the type of model, drying racks have all aluminum, aluminum alloy, stainless steel and other points, all aluminum high-end luxury; aluminum alloy beautiful fashion; stainless steel durable, free choice.
Suspended ceiling lifting racks are suitable for installation on the beams between the living room and the balcony, so that the drying racks on the ceiling can be sheltered and coordinated with the surrounding environment. At the time of installation, since the length of the ceiling is generally about 10 to 15 centimeters, the thickness of the clothes hanger must be within this range.
If there are solid walls on both sides of the balcony and there is a wall between the living room and the balcony, consider installing a folding automatic drying rack. Expand when needed, and fold when not needed.
Hand lifting racks installation notes:
After the installation is completed, note that all the lines in the handle shaker are withdrawn and re-tightened. This helps smooth operation and avoids stuck lines. Use the wire to pull it tightly to make it tight and then shake it.
In addition to hand-lifting drying racks, modern drying devices are also varied. Outdoor drying racks and indoor drying racks are also common household devices.
1. Outdoor drying racks: The outdoor drying racks are mainly fixed outside the balcony railings and use the telescopic or horizontal rotating clothes for drying, which is convenient and safe. Retractable drying rack bearing capacity of 20kg.
2, floor drying racks: for indoor hanging clothes and sun room clothes. Indoor clothes racks are easy to move and inexpensive, and are commonly used in homes.
Dr. Home Warm Tips:
1. Hand-operated lifting racks at home are also required to be maintained. Add lube oil at least once a year to keep the pulleys smooth. Especially in coastal areas, it is best to apply grease to the wire to prevent rust.
2. When the lifting hangers are used for the first time, first shake down the hanging rods (if it is found that the drying rods do not fall, do not continue to shake, you can try to hang the clothing to make it heavy), hang up the clothes, and repeatedly move up and down about 20 times, run through , Lift more smoothly.
The reason why electric vehicles are not popularized is due to the technical immaturity of the entire industry and the limitations of after-sales service. After all, they are mounted on the ceiling and are not as easy to remove, repair and maintain as small household appliances. At present, it is still manual (handshake) to dominate the market.
When installing a hand-lifting drying rack, basic structural knowledge must be mastered. Manual lifting racks need to understand the structure of lifting racks before installation?
The structure of hand-lifting drying racks is not complicated. There are five parts: hanging poles, wire ropes, hand cranks (controllers, core parts), steering gears, and top seats. Some lifting racks will also be equipped with hangers.
First, the drying rod: usually with two hanging rods, the material is mainly aluminum tubes, because the aluminum surface can do a variety of surface treatment (anodic oxidation, sandblasting, fog silver), make it look beautiful and decorative effect.
Second, the steel wire rope: Most of the wire rope of the drying rack is made of 202# stainless steel wire as raw material, and there are a few extremely high-grade 304# stainless steel wire to do it. The wire rope is divided into two parts, one part is connected to the hand crank. By shaking the handle, the wire rope can be wound into the hand crank and pulled out of the hand crank. This part belongs to the hand shaker. The other part is a wire rope that is connected to the handle and connected to the hand crank.
Third, the racks hand crank: hand crank is the most critical accessories drying racks, the market is relatively low-grade hand gear to the gear device, the higher the use of integrated spring lock process. Dr. Ju hand crank (patent number: ZL2004200881398) first warranty for five years, stamping-type one-time positioning technology to ensure accurate match, equal ratio rivet screw combination fastening technology balance; solid high-purity 26g alloy core durable durable; widen The bottom plate is even and steady; the solid thickened connecting rods; rivet-type locking handles are prevented from falling off; Great Wall top-grade lubricant is used at 10 times to ensure lubrication for more than five years.
4. Steering gear: The steering gear, also known as the universal wheel, is a device that is mounted on the wall and allows the wire rope to pass through the inner pulley and keep it perpendicular to the hand crank. The higher-grade product diverters are made of pure copper wheels.
Fifth, the top seat: is installed on the ceiling of the balcony, so that the wire rope through the internal pulley and vertical connection with the hanging rod and support all the weight of the device.
Here we introduce hand lifting racks installation techniques:
Lifting drying rack installation requires only one wall and one roof. If the balcony is roofless, push-pull drying racks can be selected. And then according to family conditions, personal preferences to choose the type of model, drying racks have all aluminum, aluminum alloy, stainless steel and other points, all aluminum high-end luxury; aluminum alloy beautiful fashion; stainless steel durable, free choice.
Suspended ceiling lifting racks are suitable for installation on the beams between the living room and the balcony, so that the drying racks on the ceiling can be sheltered and coordinated with the surrounding environment. At the time of installation, since the length of the ceiling is generally about 10 to 15 centimeters, the thickness of the clothes hanger must be within this range.
If there are solid walls on both sides of the balcony and there is a wall between the living room and the balcony, consider installing a folding automatic drying rack. Expand when needed, and fold when not needed.
Hand lifting racks installation notes:
After the installation is completed, note that all the lines in the handle shaker are withdrawn and re-tightened. This helps smooth operation and avoids stuck lines. Use the wire to pull it tightly to make it tight and then shake it.
In addition to hand-lifting drying racks, modern drying devices are also varied. Outdoor drying racks and indoor drying racks are also common household devices.
1. Outdoor drying racks: The outdoor drying racks are mainly fixed outside the balcony railings and use the telescopic or horizontal rotating clothes for drying, which is convenient and safe. Retractable drying rack bearing capacity of 20kg.
2, floor drying racks: for indoor hanging clothes and sun room clothes. Indoor clothes racks are easy to move and inexpensive, and are commonly used in homes.
Dr. Home Warm Tips:
1. Hand-operated lifting racks at home are also required to be maintained. Add lube oil at least once a year to keep the pulleys smooth. Especially in coastal areas, it is best to apply grease to the wire to prevent rust.
2. When the lifting hangers are used for the first time, first shake down the hanging rods (if it is found that the drying rods do not fall, do not continue to shake, you can try to hang the clothing to make it heavy), hang up the clothes, and repeatedly move up and down about 20 times, run through , Lift more smoothly.
Dominica Gas Tank,Dominica Lpg Gas Tank,Mini 3Kg Propane Tank,Small 3Kg Gas Cylinder
Low Pressure Gas Cylinder,High Pressure Gas Cylinder,Co., Ltd. , http://www.china-speycylinder.com