Full Automatic 4 Cavities Pet Bottle Blower

Model NO.: BLMA-4C
Performance: Automatic
Delivery: 30days
Shipping Term: by Sea or by Train
Installation: Free
Trademark: blissum
Specification: ISO9000
Origin: China
HS Code: 04400
Full Automatic 4 Cavities Pet Bottle Blower

Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: Less than 0.3percent.
Type Item Measurement BL-4000A(4-cavity)
End product Material / PET
Volume L 0.1-0.5(4-cavity)
The pretical output Pcs/h 4000
Max. length mm 350
Max.diameter mm 35-145(4-cavity)
Max. mould plate dimension(L*H) mm 350*360
Mold plate Max. mold thickness mm 150-300
Clamping  force KN 180
Mold opening stroke(adjustable)
 
 
 
 		 mm 100-150
Main machine Power KW 8
Electricity Volatege/frequency V/HZ 220-380/50-60
Machine size Main body dimension(L*W*H) M 2.8*1.25*1.9
Weight Main body weight T 1.2
Conveyor dimension(L*W*H) M 2*0.5*0.8
Conveyor weight T 0.15

Aeration System

Roof ventilation valves and exhaust fans :

For the exit of warm and humid air caused by the aeration fans, roof ventilation are designed. The design of these ventilation systems are in a way to prevent outside objects to enter inside the Silo, designed on the ceiling for better ventilation.

Centrifugal Fan :
To prevent damage to the grain caused by the increase in temperature and humidity, ventilation is required. This operation is done by the aeration fan mounted at the bottom of the silo. The body of the aeration fans are made of high quality galvanized steel sheets with a long life and very resistant to corrosion. All parts of the body are connected to each other by nuts and bolts. Exhaust air flow rate and pressure and electric power technology is calculated based on the capacity, height and type of grain stored in the silo.

Vents:
roof vents are designed to carry out the warm air from the silo and during this process to prevent any object to enter inside the silo.

Aeration System

Silo Aeration System, Sweep Auger, Silo Exhaust Fans, Silo Ventilation System

Shijiazhuang Goldrain I/E Co.,Ltd. , https://www.goldraingroup.com