Fast Clean Contaminant Easy Operating Ultrasonic Bath for Grill Parts

Fast Clean Contaminant Easy Operating Ultrasonic Bath For Grill Parts

 

1.Why Grill Parts Cleaning Is Important?

Babecue is one of the most popular party event,however, it is very hard to clean grill parts before enjoying. As we know, there will be a lot of contaminant left on grill parts after  party time. Oil,grease, condiment and other residue.

If you continue use it without cleaning, the carcinogen will increase sharply. Because you keep burning those residue.

So,grill parts need to be cleaned everytime after your barbecue time and Skymen ultrasonic cleaner will make it much easier for you. Just put it in cleaning tank and wait several minutes.

 

2. Customer's feedback

Our customer is cleaning engine block full of  carbon,oil,dust,rust, Video is showing below:

https://www.youtube.com/watch?v=wPxEQbi_4qY

https://www.youtube.com/watch?v=-VMzEqOIaXE

https://www.youtube.com/watch?v=cut8_HKLud8

 

3.Why do you need ultrasonic cleaner

Like the old solvent cleaning system an ultrasonic cleaning system consists of a tank that holds the ultrasonic cleaning solution.  Biodegradable and safe, the solutions usually come in concentrated form and are diluted to manufacturers' specifications.  Along with the tank an ultrasonic cleaner consists of an ultrasonic generator and ultrasonic transducers that are firmly attached to the bottom or sides of the tank.

When the unit is turned on the ultrasonic transducers create billions of microscopic bubbles in the cleaning solution.  Engine parts are placed in a mesh basket, on a rack, or otherwise suspended in the solution and the cleaning cycle begins as the bubbles implode with tremendous force upon contacting the parts.  Dirt, grime, grease, carbon deposits - all contaminants are stripped off of the parts without damaging them.

So tiny are the cavitation bubbles that they penetrate cracks, crevices and blind holes - areas impossible to reach by manual scrubbing.

At the end of the cleaning cycle parts are removed, rinsed and dried.  A rust inhibitor is applied and the parts are ready for reassembly.

4.Specification

 

5.Detailed Picture

Breif Look 

 

With Free Basket

 

Digital Control Panel

 

 

6.Feature Of JTS-1072

 

(1) Big Capacity For Large Quantity Cleaning

 

(2) Lift Up Function can be Designed

 

(3) Filter System can be Designed

 

(4)Power Adjustable will make you choose a suitable condition for your parts

 

7.Lift Up Function

 

Some auto parts is too heavy to move in cleaning tank, so we design a auto lift up system for you to improve your cleaning Job.

 

Picture attached

 

8.Filter System

 

Most auto parts is coverd by oil so if you choose a filter system, it will save cleaning solution and reduce second pollution to enviroment.

 

Picture attached:

 

 

9. Package and Delivery

 

It will be packed by a wood case with shipping standard.

 

Pictures attached:

 

 

Delivery: it will be sent  20days after your payment.

 

10.Company Profile

 

Skymen is the leading manufacturer of ultrasonic cleaner for 10 years. We are offering kinds of specifications and types of ultrasonic cleaners.In North America, the U.S., Canada, Europe and Britain, France, Belgium, Germany, Spain, Japan, China and Asia are selling.

We manufacture products include household ultrasonic cleaners, desktop cleaning machine, small medical ultrasonic cleaners, electronic ironware cleaning machine, jewelry ultrasonic cleaners, ultrasonic vibration plate, etc, we also provide custom service, can offer different specifications according to the customer demand of ultrasonic cleaners.

Company headquarters is located in Asia's financial center Hong Kong, factory set up in shenzhen, China, the geographical position is superior, the beautiful environment, convenient transportation. The company for global customers to provide quality ultrasonic cleaning machine series products, diverse styles and specification complete, the quality is reliable, the price is reasonable, welcome to contact with us, sincere cooperation with you! 

10.Certification

 

ISO certificate:

 

 

CE,RoHS,FCC

 

 

 

High Tech Company Certificate

 

 

Fast Clean Contaminant Easy Operating Ultrasonic Bath For Grill Parts

 

1.Why Grill Parts Cleaning Is Important?

Babecue is one of the most popular party event,however, it is very hard to clean grill parts before enjoying. As we know, there will be a lot of contaminant left on grill parts after  party time. Oil,grease, condiment and other residue.

If you continue use it without cleaning, the carcinogen will increase sharply. Because you keep burning those residue.

So,grill parts need to be cleaned everytime after your barbecue time and Skymen ultrasonic cleaner will make it much easier for you. Just put it in cleaning tank and wait several minutes.

 

2. Customer's feedback

Our customer is cleaning engine block full of  carbon,oil,dust,rust, Video is showing below:

https://www.youtube.com/watch?v=wPxEQbi_4qY

https://www.youtube.com/watch?v=-VMzEqOIaXE

https://www.youtube.com/watch?v=cut8_HKLud8

 

3.Why do you need ultrasonic cleaner

Like the old solvent cleaning system an ultrasonic cleaning system consists of a tank that holds the ultrasonic cleaning solution.  Biodegradable and safe, the solutions usually come in concentrated form and are diluted to manufacturers' specifications.  Along with the tank an ultrasonic cleaner consists of an ultrasonic generator and ultrasonic transducers that are firmly attached to the bottom or sides of the tank.

When the unit is turned on the ultrasonic transducers create billions of microscopic bubbles in the cleaning solution.  Engine parts are placed in a mesh basket, on a rack, or otherwise suspended in the solution and the cleaning cycle begins as the bubbles implode with tremendous force upon contacting the parts.  Dirt, grime, grease, carbon deposits - all contaminants are stripped off of the parts without damaging them.

So tiny are the cavitation bubbles that they penetrate cracks, crevices and blind holes - areas impossible to reach by manual scrubbing.

At the end of the cleaning cycle parts are removed, rinsed and dried.  A rust inhibitor is applied and the parts are ready for reassembly.

4.Specification

 

5.Detailed Picture

Breif Look 

 

With Free Basket

 

Digital Control Panel

 

 

6.Feature Of JTS-1072

 

(1) Big Capacity For Large Quantity Cleaning

 

(2) Lift Up Function can be Designed

 

(3) Filter System can be Designed

 

(4)Power Adjustable will make you choose a suitable condition for your parts

 

7.Lift Up Function

 

Some auto parts is too heavy to move in cleaning tank, so we design a auto lift up system for you to improve your cleaning Job.

 

Picture attached

 

8.Filter System

 

Most auto parts is coverd by oil so if you choose a filter system, it will save cleaning solution and reduce second pollution to enviroment.

 

Picture attached:

 

 

9. Package and Delivery

 

It will be packed by a wood case with shipping standard.

 

Pictures attached:

 

 

Delivery: it will be sent  20days after your payment.

 

10.Company Profile

 

Skymen is the leading manufacturer of ultrasonic cleaner for 10 years. We are offering kinds of specifications and types of ultrasonic cleaners.In North America, the U.S., Canada, Europe and Britain, France, Belgium, Germany, Spain, Japan, China and Asia are selling.

We manufacture products include household ultrasonic cleaners, desktop cleaning machine, small medical ultrasonic cleaners, electronic ironware cleaning machine, jewelry ultrasonic cleaners, ultrasonic vibration plate, etc, we also provide custom service, can offer different specifications according to the customer demand of ultrasonic cleaners.

Company headquarters is located in Asia's financial center Hong Kong, factory set up in shenzhen, China, the geographical position is superior, the beautiful environment, convenient transportation. The company for global customers to provide quality ultrasonic cleaning machine series products, diverse styles and specification complete, the quality is reliable, the price is reasonable, welcome to contact with us, sincere cooperation with you! 

10.Certification

 

ISO certificate:

 

 

CE,RoHS,FCC

 

 

 

High Tech Company Certificate

 

 

Oxide Ceramics Powder

Oxide powder for thermal spray refers to a type of powder material that is used in thermal spray processes. Thermal spray is a coating technique where a material in powder form is heated and propelled onto a substrate, forming a coating.

Oxide powders are commonly used in thermal spray applications due to their high melting points, excellent wear resistance, and thermal insulation properties. They can be used to create protective coatings on various surfaces, such as metals, ceramics, and plastics.

Some common types of oxide powders used in thermal spray include:

1. Aluminum oxide (Al2O3): This oxide powder is widely used for its high hardness, wear resistance, and thermal insulation properties. It is commonly used for coating applications in industries such as aerospace, automotive, and electronics.

2. Zirconium oxide (ZrO2): Zirconium oxide powder is known for its high melting point and excellent thermal barrier properties. It is often used in thermal spray coatings for gas turbine engine components, where thermal insulation is critical.

3. Chromium oxide (Cr2O3): Chromium oxide powder is used for its high hardness, corrosion resistance, and wear resistance. It is commonly used in applications where high temperature and abrasive wear resistance are required.

4. Titanium oxide (TiO2): Titanium oxide powder is known for its high refractive index and excellent UV resistance. It is often used in thermal spray coatings for optical and decorative applications.

These oxide powders can be applied using various thermal spray techniques, such as flame spraying, plasma spraying, or high-velocity oxy-fuel (HVOF) spraying. The choice of oxide powder and thermal spray technique depends on the specific application requirements and desired coating properties.

Oxide Ceramics Powder,Pure Aluminum Oxide Powder,Chromium Oxide Ceramics Powder,Yttria Stabilized Zirconia Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcwelding.com