Fangyuan Polystyrene Moulding Machine Styrofoam Panels Block in China Manufacturer

Main Features of styrofoam panels block in china manufacturer 
EPS Lost-foam block molding machine 
A, Steam, water and air adopt big pipes & stainless steel wedge-shaped.
It is used 10" air-inlet pipe and 12" drainage pipe instead of traditional 4-6" air inlet and drainage pipes. Specially, Adopts stainless steel wedge strip, which realize the ventilation area 17-18%(normal aluminum alloy with milling groove of vent plate only 3.8% owning to small vent area of too much air inlet and cooling time), it increased the cross steam speed and greatly improve the adhesion degree of block, so that the resist compression strength and tensile strength of block can be achieve simultaneity.
B, Adopts "C" type heating (five sides of air-inlet, one side of exhaust), improved cross steam force of block, realize even heating and density for EPS blocks.
C, Adopts Germany foam pressure sensor instead of electric contact pressure sensor, which control the foam pressure to control the whole heating process, keep steam heating and cooling stable simultaneity, avoid broken or shrinkage of inside block.

Technical Data of styrofoam panels blocks in china manufacturer
Packaging & Shipping
Packing: standard exporting package 
Shipping port: shanghai/ningbo

WE can provided this service
1. Value clients, guarantee equipment quality and answer clients' questions anytime and anywhere.
2. Customizing machines according to clients' inquiry , such as different design, different brand parts, different colors, more function,etc. 
3. Engineers go to clients' factory in time for installation , training and trial production . 
4. More spare parts are given to clients for free to ensure the factory working without suddenly stop.
5. 1 year free warranty, Lifetime technical service support.    

Our Company information
1,Established in 1988, with the 27 years of development ,Fangyuan has development more than 10 offices inside and outside of China, with over 700 staff and covered 100,000 sqm2 workshop.
2,Yearly around 2200 sets machines and 2000 sets EPS moulds outputs, which keep Fangyuan as the leading EPS,XPS,EPP Machinery manufacturer in China.  
3,Fangyuan is the first drafter of National Standard of EPS machinery in China; And obtained the ISO9001-2008 and European Standard CE certification.
4,Fangyuan brand was authorized as "China Famous Brand"and "China High Technology Enterprise" 

The three control modes: one is all the operation control is completed by computer, computer engraving machine at work in the work of the state, unable to carry out other typesetting work, waste may be caused by the misoperation of the computer; two is the use of single-chip control, the engraving machine can work at the same time the layout, but not closed the computer, the computer can reduce the errors caused by the waste, there is only one spindle

 

X Working Area	1300mm
Y Working Area	2500mm
Z Working Area	200mm
Traveling Positioning Accuracy	±0.05mm
Repositioning Positioning Accuracy	±0.05mm
Table Surface	T-Slot
X,Y ,Z Structure	XY gear wheel, Z ball screw
Max. Power Consumption(Without spindle)	1.84KW
Max. Rapid Travel Rate	25000mm/min
Max. Working Speed	15000mm/min
Spindle Power Motor	3.0KW
Spindle Speed	0-24000r/min
Drive Motor	Stepper
Driver	860,450A
Command	G-code*.u00*.mmg*.plt
Working voltage	AC220V/50Hz
Control System	Copy of NC Studio Original of NC Studio: The price will add US$500.00 DSP Hand Set: The price will add US$285.00
Guide rail	20 Square rail (TAIWAN BRAND:TBI)
Control cabinet	Independent cabinet
N.W./G.W.	900/1100KGS
Packing Size	3200*2100*1800mm

 

Single Head Woodworking Machine

Single Head Woodworking Machine,Wood Cnc Lathe Machine,Cnc Wood Milling Machine,Wood Cnc Machine

JINAN HT MACHINERY CO.,LTD , https://www.jncncrouter.com