Model No.: YB-20
Product introduction:Pumping Fuel: Diesel, kerosene and water
Power: electric
Rated Voltage |
DC12V/24V |
Rated Current |
0.9A |
Rated Power |
25W |
Maximum flow |
18L/Min |
Length(mm) |
145mm |
Diameter(mm) |
47.5mm |
Maximum working pressure |
14.5psi (1 bar) |
Troubles |
Reasons |
Treatments |
No initial oil output |
1.Polarity reversed(+) (-). |
1.Correctly attach polarity to power source (+) (-). |
2.Leak in suction line. |
2.Ensure the suction hose is securely fastened and there are no leaks. |
|
3.Pump not primed. |
3.Prime the pump by adding oil to near the pump inlet. |
|
Little oil flow |
1.Low voltage supply. |
1.Increase the supply voltage to proper levels. |
2.Excessive suction height or head. |
2.Reduce suction height or head. |
|
3.Obstruction in the filter strainer. |
3.Clear foreign objects,clean filter strainer. |
Â
Model No.: YB-20
Product introduction:Pumping Fuel: Diesel, kerosene and water
Power: electric
Rated Voltage |
DC12V/24V |
Rated Current |
0.9A |
Rated Power |
25W |
Maximum flow |
18L/Min |
Length(mm) |
145mm |
Diameter(mm) |
47.5mm |
Maximum working pressure |
14.5psi (1 bar) |
Troubles |
Reasons |
Treatments |
No initial oil output |
1.Polarity reversed(+) (-). |
1.Correctly attach polarity to power source (+) (-). |
2.Leak in suction line. |
2.Ensure the suction hose is securely fastened and there are no leaks. |
|
3.Pump not primed. |
3.Prime the pump by adding oil to near the pump inlet. |
|
Little oil flow |
1.Low voltage supply. |
1.Increase the supply voltage to proper levels. |
2.Excessive suction height or head. |
2.Reduce suction height or head. |
|
3.Obstruction in the filter strainer. |
3.Clear foreign objects,clean filter strainer. |
Â
Gantry Plasma Cutting Machine is mainly used for big size and thick metal sheet cutting work .The Gantry carrying the plasma cutting head back and forth on two parallel orbits with the metal sheet placed in the middle .Because of there is no mechanical structure need ,the gantry type plasma cutting machine could be built into bigger size for cutting width .Because of the same reason ,it makes possible to do as long as working request for the cutting Length .Gantry plasma cutting machine normally equipped with bigger than 100A plasma generators .It could cut 20-35mm thickness carbon steel .Therefore ,to cut big size metal sheet ,choose a Gantry Plasma Cutting Machine would be an ideal choice .
Gantry Plasma Cutting Machine,Gantry Plasma Cutters,Cnc Gantry Plasma Cutting Machine,Cnc Plasma Cutting Machine For Metal
Jinan Rapid CNC Machinery Co.,LTD , https://www.jngildemeistercnc.com