| Model | WVA29245 |
| Size(mm) | 249.7x118.4x28.2mm |
| Formula | Semi-metaiilc |
| Backing plate | Cast iron backing plate |
| Packing | Netural box |
| Application | Mercdes bez,Renault,,Daf |
| Mileage | 30000-50000Kms |
| The Advantages of C.V Brake Pads: 1.Certificated by ISO9001, TS16949 standard. 2.Passed the ECE R90 certification in 2007. 3.Stable braking performance and anti-high temperature. 4.Long life time, including brass to make sure good heat conduction, also mineral fibers to reduce hurt for brake rotor. 5.Professional designed slot and chamfer, no noisy, no dust. 6.Near OE configuration compliant. 7.The product is suitable for medium and high-end market demand. 8.Meet the requirements of environmental protection. | |
Our Team & Service:
1. Raw Material Purchaser 3& Technologist: 4. Including 1 senior engineer worked in brake friction field for more than 30 years.
2. QC Department: 5 - including inspection for raw material, semi-made product, finished product & equipment. Before machining the next process, QC would make sure the last process in good condition.
3. Professional sale team: 8 - Communicate with factory fully according to customer's requirement - Learn production progress and report to customer - Make inspection once goods is ready, make sure every detail is same with customer's request then - Find forwarder in favorable price and perfect service.
4. Give response within 24h.
5. Positively avoid or solve customers questions: such as give pre- shipping production inspection, inquiries market feedback etc.
6. Convenient transportation near the Qingdao Port
Pls trust if only you place order, everything rest would be done by us!
Â
The inlaid spiral finned tube is to pre-process the spiral groove of a certain width and depth on the steel pipe, and then inlay the steel strip on the steel pipe on the lathe. During the winding process, due to a certain pre-tightening force, the finned tube steel strip will be tightly clamped in the spiral groove, thus ensuring a certain contact area between the steel strip and the steel tube. In order to prevent the steel strip from springing back and falling off, both ends of the steel strip should be welded to the steel pipe.
In order to facilitate inlaying, there should be a certain side clearance between the steel strip and the spiral groove. If the side clearance is too small and interference is formed, it will be difficult for the mosaic process to proceed smoothly. In addition, the wound steel strip always has a certain springback, as a result, the steel strip and the bottom surface of the spiral groove cannot be well joined. Inlaid fins can be carried out on general-purpose equipment, and the cost is not high, but the process is complicated and the production efficiency is low.
Inlaid Finned Tube,Inlaid Finned Tubes,Inlaid Fin Tube
Wuxi Mcway Equipment Technology Co., LTD , https://www.mcwayfinnedtube.com