There are rules on the engine model of the suction truck produced by Xiagong Chusheng (Hubei) Special Automobile Manufacturing Co., Ltd. Each type of independent engine will have a corresponding engine code type, and some relevant suction dies will be known. Knowledge of the engine code of the vehicle can tell which type of engine is included in the engine model code. Some detailed engine technical parameters such as engine horsepower, displacement, bore diameter, stroke, emission standard, and manufacturer can be seen. The following is the knowledge introduced by Chu Sheng factory staff:
The serial number of the cylinder bore of the suction truck:
The serial number of engine products used in the series is the cylinder bore and stroke series, and the same bore diameter and stroke are composed of the same series code 6 code. The uppercase alphabetic letters indicate that the numbers are as follows:
Series code Bore x stroke Series code Bore x stroke A 108x132 E 110x112
B 108x125 G 112x132
C 108x120 J 105x125
D 108x115 M 120x145
F 92x100 L 140
Power code: The power code is expressed in terms of the actual engine power (in horsepower) using Arabic numerals. When the actual power of the engine (in horsepower) is not 0 or 5, it is selected as near.
Emission code: The emission code is represented by Arabic numerals, the Euro I emission level is denoted by 1, the Euro II emission level is denoted by 2, and Euro III is denoted by 3.
Significant structural improvement code: Major structural improvement code is represented by Arabic numerals, numbered sequentially from 0, Yuchai's current code is 0 cold pressurization or boost; 1 is a single pump, 3 is a high pressure common rail.
In addition to the above code, the following "-XX" represents horsepower. For example, "-26" represents 260 horsepower, 26 is an abbreviation, and so on. E3 is the Euro 3 code. CA6DL2-31, Aowei Engine, 310 hp.
Listed as a suction truck engine model: YC4D130-20 said: Yuchai, four-cylinder, D said a series of engines, 108mm bore x115mm stroke, 130 horsepower, Euro II emissions, basic engine.
Brief Introduction:
Intermittent Ball Mill has both wet grinding type and dry grinding type.The dry grinding can produce ultra-fine powder and the fineness could up to 1000-16000 mesh. This grinding machine is for highly fine grinding and materials should be crushed in fineness state into the ground to have the highest grinding efficiency and economic benefit.
Features:
1. Low investment and high returns.
2. Simple structure and convenient maintenance.
3. Installation and adjustment are easy to be operated.
4. Suitable for ordinary and special material mixing and grinding operation.
Users can choose the appropriate models of liners and types of medium according to specific gravity and hardness of materials.
Technical Parameters:
| Model | Capacity(t/h) | Barrel Rotation Speed(r/min) | Power(kw) | Weight(t) |
| 900×1200 | 0.2 | 38.5 | 5.5 | 2.8 |
| 1300×1500 | 0.5 | 33 | 7.5 | 4.5 |
| 1500×1800 | 1.2 | 28.5 | 11 | 6.6 |
| 1800×2000 | 1.5 | 24 | 15 | 8.7 |
| 2100×2100 | 2.5 | 22 | 22 | 13.2 |
| 2600×2800 | 5 | 16.5 | 37 | 19 |
| 3000×3800 | 10 | 14.5 | 55 | 32 |
| 3200×4600 | 15 | 13.5 | 75 | 46 |
Intermittent Ball Mill,Chinaware Ball Mill,Ceramic Liner Ball Mill,Ceramic Ball Mill
Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co.,Ltd. , http://www.zonedingmac.com