Bobcat Mini Excavator Oil Replacement Precautions

Although the quality of the Bobcat small excavator is very good, it is more efficient to use, but you need to pay attention to the matter during use, otherwise it will have a corresponding impact.

Bobcat Mini Excavator Oil Replacement Precautions

1. During the oil change process, it is strictly forbidden to start the engine without the oil tank being refueled, the hydraulic pump and the motor room not being refueled.

2. During the oil change process, the stopper must be placed before and after the crawler belt, and the locking mechanism should be inserted into the lock pin; when the bucket, the stick and the boom move, it is strictly prohibited to stand within or below the movement range.

3. When disassembling each pipe joint, the system must be placed freely on the ground to confirm that the pipe can be removed without pressure. When disassembling, try to avoid the drainage direction at the joint. Wear protective glasses when working.

4. When the small excavator turns or walks in the upper part, the driver must alarm according to the horn. It is strictly forbidden to stand in the track and swing range.

5. When disassembling, do not damage the joint surface and thread of each pipe joint of the hydraulic system.

6, the work site, smoking is strictly prohibited, open fire is strictly prohibited.

7. When changing oil, change the oil on the same day, do not stay overnight, because at night or when cooling, the moisture in the air will form water vapor and condense into water droplets or frost, and enter the system to rust the metal parts, causing hidden dangers.

The Bobcat Mini Excavator should be lubricated to reduce wear. These points require special attention when performing excavation work on the water. When operating a small excavator in water, the grease track adjustment should be fully applied before and after each use. If used in large quantities, the track tension should be checked regularly or daily. (This article is from the Bobcats)