The Beijing Municipal Environmental Protection Bureau issued the "Regulations on Further Promoting the Elimination of Old Motor Vehicles in the City (2013-2014)" (hereinafter referred to as the "Program"), and will continue to intensify efforts to eliminate old Beijing motor vehicles and control motor vehicle emissions. Pollution, reduce air pollution, and continuously improve the air quality of the capital. The difference from the previous plan is that the government subsidy standard has been raised and the corporate rewards have been relaxed. This will promote the upgrading of the Beijing auto market to a certain extent, and more consumers will replace the vehicles, and more enterprises will join. In the subsidy program, thereby promoting the sale of cars.
10% of the old motor vehicles in the city have been eliminated, and the scrap rate will be increased next year.
According to data released by the Municipal Environmental Protection Bureau, from January 1, 2011 to the end of November 2012, the city eliminated 552,000 old vehicles, accounting for 10% of the city's 5.189 million vehicles. The number of old motor vehicles that were phased out after the implementation of the policy on August 1, 2011 was 458,000, which would reduce the pollution of carbon monoxide, nitrogen oxides, hydrocarbons and particulate matter emitted by motor vehicles by 160,000 tons. The elimination of old motor vehicles has played a significant role in controlling emissions and improving the environment.
According to the person in charge of the Municipal Environmental Protection Bureau, this year's phase-out focus is on the national III and previous old motor vehicles, and the promotion of more old vehicles will be accelerated. With the increase in the use of used cars around the country, Beijing used cars will turn out. The situation of more difficult circulation, so the government subsidy standards for scrapped vehicles is also raised to increase the scrap rate of old vehicles next year. The average subsidy for scrapped vehicles in the new "Proposal" has been increased from the original 4,500 yuan to 6,500 yuan, and the service life of the scrapped subsidized vehicles has been adjusted from 6-8 years and more than 8 years to 6-10 years and more than 10 years. For a car that is 9 years old, the subsidy for the current program is 4,500 yuan, but after the implementation of the new "plan", it will receive a government subsidy of 7,000 yuan. This will promote the scrap rate of old vehicles to a certain extent.
It is understood that the current program as of the end of November, the old motor vehicle scrap rate is 10%, the person in charge of the Municipal Environmental Protection Bureau said that after the implementation of the new "Program", it is expected that the scrap rate of old vehicles will increase to 20%-30% next year.
Increased subsidies for the new "Program" will promote car replacement and promote new car sales
It is understood that as the current old car elimination plan will be completed at the end of December, the new "plan" has not been announced, Beijing 1 old-for-new ratio increased from 55.4% in October to 60.4% in November, Beijing's new car sales rebounded sharply in November, 50,500 vehicles. This shows that the policy subsidy is stimulating the Beijing auto market.
The data released by the Municipal Environmental Protection Bureau also shows that car owners and enterprises recognize the elimination of old cars. From the implementation of the policy to the end of November, a total of 254,000 car owners received government subsidies; 1.05 billion yuan of government subsidies were distributed; 46 auto companies participated in the elimination of renewal rewards, and a total of 2262 new car models were announced, while old car replacements would not Increasing the number of cars in Beijing has stimulated new car transactions.
The new "Program" has relaxed the corporate rewards, which will attract more hot sales and economic models. According to the person in charge of the Municipal Environmental Protection Bureau, as long as the reward range of the enterprise is not lower than the standards set by the government, the subsidy standard can be specified by itself. This will attract more hot-selling and promotional models into the platform and expand the range of car owners' choices. Will drive more car replacement and new car sales. Under the premise of keeping the car purchase policy in Beijing, the replacement business has become a sales growth point that can not be ignored in the Beijing auto market, and the Beijing auto market will transform into the era of redemption.
1. Product description:
Gas cutting is achieved by what is basically a chemical/thermal reaction occurring with iron and iron alloys only. Iron or its alloys may be heated to a temperature at which the iron will rapidly oxidize in an atmosphere of high purity oxygen. There will generate large amount of smoke during gas cutting, which is harmful to worker`s health and the service life of cutting machine. Therefore, dust and smoke extraction system is needed to removal these hazardous partices.
2. Moland Product Series
Portable Fume Extractor series: MLWF50, MLWF70, MLWF100, MLWF360, MLWF120, MLWF200, MLWF280-basic, MLWF280S, MLWF290, MLWF300, MLWF300A, MLWF350, MLWF350D, MLWF400, etc.
Stationary fume extractors: MLWF350-dust bucket type, MLWF500-6T, MLWF500-6T dust bucket type, MLWF500-9T, MLWF800, MLWF800-dust bucket type, MLWF1000, MLWF1500, MLWF2000, MLWF3000, MLWF3500, MLWF4000). The electric control cabinet can be seperated from main equipment for convenient operation when the main equipment is placed outdoors.
Grinding dust extractors: MLWF100D, MLWF150D, MLWF200D, MLWF320-DM, MLWF180, MLWF380, MLWF480) and grinding cabinet (MLWF900). The grinding cabinet is usally equipped with telescopic or fixed grinding room, to form a semi-closed space to control dust and smoke spread. It also improves the filtration efficiency with low air volume and energy consumption.
VOCs treatment
3. R&D
In order to provide advanced products, our R&D department develops 3 to 5 new products every year, and irregularly improves the performance, appearance, and installation methods of existing products.
4. Certification
All our products are approved by CE, ISO9001, ISO14001, utility model patent, design patent, Program copyright, etc.
5. Exhibition
Moland participates at least 5 industry exhibitions each year.
6. Central Fume Extraction System
1) Cantilever type fume extraction system
Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the Suction Hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.
2) Hood suction type fume extraction system
Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the suction hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.
3) Room tupe fume extraction system
Room-type dust removal is suitable for the purification of fumes and smoke generated during the production of automated equipment, such as welding robots, welding machines, grinding, grinding and polishing of metal and plastic parts, drilling, thermal processing, cutting and crushing, stone processing, powder packaging, solid particles and various dusts and fumes produced by mixing and processing.
For working conditions such as robot automatic welding, circular seam and longitudinal seam welding, the smoke and dust purifier is installed with the robot workstation, so that the workstation has its own dust removal function. The fume and smoke are effectively collected through equipment components such as pipes and dust hoods. The room-type design prevents the volatilization and diffusion of smoke to keep the air in the workshop clean.
The working conditions with moderate welding workpieces and large amounts of dust and smoke are suitable for room-type treatment solutions. The room type centralized dust dedusting solution is divided into side suction and top suction method dust collecting ways. The appropriate solution can be designed according to the site conditions and treatment goals.
4) Blow suction type fume extraction system
Blow-suction type dust removal solution is a ventilation air flow composed of blown air and inhaled air flow. Therefore, it is a dust removal method that can effectively control the spread of pollution sources. This dust removal method is installing exhaust inlets on two-span center column or single-span side column (wall) and air outlets on the opposite wall column to form a circulating air flow to drive the smoke and dust into the purification machine, consequently performing overall dust removal and purification in the workshop. This system occupies a small area and has obvious purification effect, which is suitable for the purification of smoke and smoke in more complex production workshops.
7. Company information
Jinan Moland Environmental Tech Co., Ltd., is located in No. 11889 Jingshi West Road, Changqing District, Jinan City, Shandong, China, established in 2016. It`s an environmental protection technology enterprise specializing in research, development, manufacture and sale of efficient smoke purification systems.
The company is committed to reducing the environmental impact of production process, protecting workers from harmful gases and dust, and creating a cleaner working environment. At present, the company′s products have been successfully applied in automobile, railway, construction machinery, marine engineering, aviation and other mechanical processing industries, as well as new materials, grain, wood, recycled resources processing and other industries. The company has passed the ISO 9001 quality management system certification, obtained the certification of China Environmental Protection Products issued by China Environmental Protection Industry Association, and CE certification of EU. It also has a number of invention patents, utility model patents and appearance patents. Through continuous R&D and innovation, many products of the company have reached the international leading level.
Moland′s environmental services cover the whole process from project design, product manufacturing to installation, commissioning and after-sales service. We will provide you with the most professional governance program and the best quality service.
Flame Cutting Fume Extractors,High Efficiency Cartridge Fume Purifier,Welding Dust Remover,Dust Control Systems
Jinan Moland Environmental Tech Co.,Ltd , https://www.sdmoland.com