The application and structural characteristics of the manual knife gate valve are briefly described as follows:
Manual knife gate valves can only be fully opened and fully closed and cannot be adjusted or throttled.
The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form wedges, and the wedge angle varies with the valve parameters, usually 50. The gate of the wedge-type gate valve can be made into a whole, called Rigid shutter
It can also be made into a gate that can produce a slight amount of deformation, in order to improve its craftsmanship, to make up for the deviation of the sealing surface angle in the process of processing, this type of gate is called elastic gate knife type gate valve closed, the sealing surface can only rely on medium Pressure to seal, that is, rely on the pressure of the media to press the sealing surface of the gate to the valve seat on the other side to ensure the sealing of the sealing surface. This is self-sealing. Most knife-type gate valves use forced sealing, that is, when the valve is closed, it is necessary to force the gate plate to press against the valve seat in order to ensure the sealing performance of the sealing surface.
Manual knife gate valves can only be fully opened and fully closed and cannot be adjusted or throttled.
The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form wedges, and the wedge angle varies with the valve parameters, usually 50. The gate of the wedge-type gate valve can be made into a whole, called Rigid shutter
It can also be made into a gate that can produce a slight amount of deformation, in order to improve its craftsmanship, to make up for the deviation of the sealing surface angle in the process of processing, this type of gate is called elastic gate knife type gate valve closed, the sealing surface can only rely on medium Pressure to seal, that is, rely on the pressure of the media to press the sealing surface of the gate to the valve seat on the other side to ensure the sealing of the sealing surface. This is self-sealing. Most knife-type gate valves use forced sealing, that is, when the valve is closed, it is necessary to force the gate plate to press against the valve seat in order to ensure the sealing performance of the sealing surface.
In the past, prefabricated concrete slab or asbestos slab was used for the roof of industrial plant. With the rapid promotion of light steel structure, PVC roof tile has replaced the above two materials with many significant advantages. At the same time of providing better heat insulation effect, PVC roof tile with the mature development of light steel structure can reflect a series of advantages of light steel system, such as light weight, fast, flexible layout and so on, so it has become a scheme in the current single-layer factory buildings.
Pvc Roofing,Pvc Corrugated Sheet,Corrugated Plastic Roofing,Pvc Plastic Roofing Sheets
PINGYUN INTERNATIONAL , https://www.pingyunconstruction.com