3-in-1 Feeder, Material Leveling and Feeding Equipment, Punching Automatic Feeding (MAC3-400)

Common problems in the design and production of 3-in-1 feeder

The 3-in-1 feeder has high automation, flattening, good feeding precision, high synchronization performance, easy operation, great saving in labor cost and floor space, and has won the favor of more and more stamping customers. .

With the increase in demand, there are more and more manufacturers engaged in the production of three-in-one feeders, but the quality that comes with them has also been mixed, especially in design and production. problem.

The 3-in-1 feeder mainly consists of two major functional components: the rack part and the leveling feeding part, and the main problem in the design occurs in the leveling feeding part. The flattening feeding part of the 3-in-1 feeder includes the front feeding mechanism. , a middle leveling mechanism, a rear feeding mechanism, and a driving device.

Problem 1: In the three-in-one feeder drive device, the feed roller is generally controlled by the servo motor. Because the output torque of the servo motor itself is small and cannot meet the needs of use, a certain deceleration should be performed between the feed roller and the servo motor. In order to achieve increased use of the moment.

Problem 2: In the feeding process, in order to meet the accuracy requirements of the three-in-one feeder, it is generally required to set the positioning pin in the mold to eliminate the feeding error each time. Therefore, the feeding device needs to have a relaxing function at each feeding. After the step is completed, the feed roller needs to be relaxed to achieve repositioning of each product to eliminate the cumulative error of each feed.



Question 3: During the use of the three-in-one feeder, the power source used for relaxation is air pressure, and it is generally used in conjunction with the punching machine. It is inevitable that vibration will occur, and the three-in-one positioning due to vibration will often occur. The screw is loose and affects the leveling accuracy.

Therefore, the current method is to directly process the countersunk hole on the side plate at the end of the positioning shaft and the distance between the fixed side plates, or without the positioning axis. This method is not conducive to adjusting the positioning axis to eliminate the error.




Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.

1.  Pre-Sales Service:We have professional designers to meet the different requirement of our customers.

2.  After-Sales service:We have an efficient team to meet 24*7 all day service.

3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.

4.  Engineers can provide service machinery overseas.

Common problems in the design and production of 3-in-1 feeder

The 3-in-1 feeder has high automation, flattening, good feeding precision, high synchronization performance, easy operation, great saving in labor cost and floor space, and has won the favor of more and more stamping customers. .

With the increase in demand, there are more and more manufacturers engaged in the production of three-in-one feeders, but the quality that comes with them has also been mixed, especially in design and production. problem.

The 3-in-1 feeder mainly consists of two major functional components: the rack part and the leveling feeding part, and the main problem in the design occurs in the leveling feeding part. The flattening feeding part of the 3-in-1 feeder includes the front feeding mechanism. , a middle leveling mechanism, a rear feeding mechanism, and a driving device.

Problem 1: In the three-in-one feeder drive device, the feed roller is generally controlled by the servo motor. Because the output torque of the servo motor itself is small and cannot meet the needs of use, a certain deceleration should be performed between the feed roller and the servo motor. In order to achieve increased use of the moment.

Problem 2: In the feeding process, in order to meet the accuracy requirements of the three-in-one feeder, it is generally required to set the positioning pin in the mold to eliminate the feeding error each time. Therefore, the feeding device needs to have a relaxing function at each feeding. After the step is completed, the feed roller needs to be relaxed to achieve repositioning of each product to eliminate the cumulative error of each feed.



Question 3: During the use of the three-in-one feeder, the power source used for relaxation is air pressure, and it is generally used in conjunction with the punching machine. It is inevitable that vibration will occur, and the three-in-one positioning due to vibration will often occur. The screw is loose and affects the leveling accuracy.

Therefore, the current method is to directly process the countersunk hole on the side plate at the end of the positioning shaft and the distance between the fixed side plates, or without the positioning axis. This method is not conducive to adjusting the positioning axis to eliminate the error.




Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.

1.  Pre-Sales Service:We have professional designers to meet the different requirement of our customers.

2.  After-Sales service:We have an efficient team to meet 24*7 all day service.

3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.

4.  Engineers can provide service machinery overseas.

Tabel Blender

China Electric Processor,Mini Mixer For Home-Used, Table Electric Blender Mixer,Mini Blender Mixer, we offered that you can trust. Welcome to do business with us.

Jiangmen Hongyi Electrical Appliance Manufacturing Co., Ltd. is a professional enterprise which aims at producing household electrical appliances. Our company is located in Jiangmen City, Guangdong Province. We are adjacent to Guangzhou, Shenzhen, Macao and Hong Kong. The transportation is very convenient.
Our company has product development, mould manufacturing, testing, product manufacturing and other departments. We have a professional team to ensure product quality. We provide quality and high performance products for clients. Our company aims to establish good and stable trade relationships with clients. Our products are exported to Southeast Asia, the Middle East and other countries and regions. We have deeply won consumer's trust.
Our main products are food mixers, blenders, electric fans, electric irons, plastic accessories and hardware.
Our company has consistently adhered to the concept of "outstanding quality, affordable price, excellent service". We hope to strengthen economic cooperation with friends from all over the world and create a bright future together.

Electric Processor,Mini Mixer For Home-Used,Table Electric Blender Mixer,Mini Blender Mixer

Jiangmen HongYi Electrical Appliance Manufacturing CO.LTD , https://www.hongyiappliances.com