Xuangong TY165-3C bulldozer is an upgraded product based on the original TY165-3 bulldozer, combined with user needs and market feedback, in accordance with standardization and generalization, to improve product performance and quality.
The Xuangong TY165-3C bulldozer not only redesigned the final drive, travel system, bulldozer and other components, but also improved the components such as shift steering, throttle control, electrical system and exterior trim.
1, the engine upgrades, the power is stronger
The Weichai WP10G181E355 engine is fully compliant with the national three standards. It adopts 93 sand filter to effectively extend the life of the air filter element and slow down the engine wear. It has the advantages of strong power, easy maintenance and low fuel consumption.
2, hydraulic pilot operation, lower labor intensity
The working device valve is hydraulically pilot operated, which greatly reduces the operating force. The single handle can achieve accurate control of the blade lifting, lowering, floating and roll. Compared with the traditional direct operation of the working valve group by the linkage mechanism, a series of linkage mechanisms are omitted, which greatly reduces the labor intensity of the driver.
3. Optimize the bulldozer and work more efficiently
The new bulldozer, the curved plate adopts the R700mm small arc design, which can better roll the soil during the dozing process. The upper arm and the tilting cylinder are arranged in parallel with the center of the vehicle body to increase the reliability of the components, and the protection of the steering cylinder is strict.
The blade has a large reinforcing point on the lifting cylinder, the tilting cylinder and the upper support, and the inside is arranged with a reinforcing rib, the strength is high, the effect of the soil is good, and the working efficiency is greatly improved.
4. The front protection board is designed to be strengthened and the bearing capacity is greater.
Increase the strength of the cylinder support beam and increase the rigidity of the front protection plate.
The front beam is added in front of the water tank to further increase the rigidity of the front protection plate, so as to prevent the water tank from being deformed and leaked due to the deformation of the front protection plate.
5, electrical system integration optimization, the failure rate is smaller
Taking the market quality feedback and the actual problems that arise during the assembly process as the entry point, the national III engine integrates the electrical systems of the TY165-3 and T165-3 series bulldozers, so that the design is universal, the assembly is standardized, and the failure rate is reduced. .
6, large displacement gear transmission, longer life
The final drive adopts two-stage spur gear reduction, and the gear teeth adopt the large displacement gear of American Carter design theory, which improves the life of the drive train.
7, improve the walking system, effective traction efficiency is higher
The walking system adopts the roller, the carrier sprocket, the guide wheel and the crawler in the form of Carter D6G structure, and the track can also be equipped with a lubricated type crawler. The improved walking system increases the minimum ground clearance of the whole machine by 30mm, the grounding specific pressure by 3kPa, and the effective traction efficiency of the whole machine is improved.
8, the control of the flexible shaft to improve, the system is more reliable
The flexible shaft end thread M6 of the shift steering assembly is changed to M8, and the thread M14 of the fixed portion is changed to M16.
The soft shaft end thread M6 in the throttle operation is changed to M8, which improves the service life of the long flexible shaft at the trailing edge and improves the reliability of the operating system.
9, diesel tank improvement, welding stiffness is better
The bottom surface of the diesel tank is changed from the original pressed surface to the flat surface, and the bottom reinforcing belt is widened to improve the welding rigidity of the fuel tank. After the improvement, the test is carried out with good effect.
It is worth noting that the upgraded models of the Xuangong T-series 165-horsepower bulldozer also include:
â–Mechanical transmissionâ–
T165-3C standard type
TS165-3C wet type
T165-3CHW sanitation type
â–Hydraulic transmission â–
TY165-3C standard type
TYS165-3C wet type
TYS165-3CHW sanitation type (this article is from Hebei Xuangong)
Heavy Wall Aluminium Busbar,Aluminium Busbar,Threaded Aluminum Pipe,Aluminum Square Tubing Lowes
KAM KIU ALUMINIUM GROUP , https://www.taishankamkiu.com