The METROL tool setter has four advantages:
1 High precision
Repeatable positioning accuracy 1um, direct-acting contact method, high parallelism, small diameter tool can also be measured
2 long life
Can be repeated 3 million times the knife, in addition, the knife surface is an interchangeable contact surface, grinding, polishing, titanium plating, extending the life of the equipment;
3 High tightness
With ip67 protection level: waterproof, anti-oil, and anti-cutting fluid, it can be used in harsh production environments and has good sealing performance, maintaining high precision for a long time.
4 Safe and easy operation
Have over-travel protection device, optional over travel signal.
Therefore, installing METROL tool setting tools on CNC machine tools and engraving machines enables cutting tool position measurement operations for tool and blade replacement, even if it is not a skilled worker, and can also solve the problem of continuous machining. Automated problems such as wear and damage caused by poor accuracy.
In addition, METROL's tool setting tool has more advantages when it is connected to the numerical control system of the CNC machine tool:
1 No test or data editing
After the tool is installed, the length of the tool can be automatically registered in the TOOL OFFSET of the CNC by the tool setting program once the tool head contacts the tool setter.
2 Automatic tool change in a short time
The operation rate of the machine can be increased, and the operation of the cutter head can be completed in a short time.
3 automatic tool wear correction
Once the head wear has been detected, it can be automatically corrected by the relevant wear program to ensure the machining accuracy of the workpiece.
4 Automatic detection of tool damage
If the cutter head is detected to be damaged, the machine tool automatically stops running and prompts an alarm.
Evenly distributed in the high temperature resistant stainless steel seamless tube of high temperature resistance wire, dense part in gap to fill in the performance of thermal conductivity and good insulation performance are the crystallization of magnesium oxide powder, this kind of structure not only advanced, high thermal efficiency, and even heating, when high temperature resistance wire in an electric current passes through the heat to the metal surface diffusion through crystallization of magnesium oxide powder, then passed to the heated or air, achieve the purpose of heating.
316 Stainless Steel Immersion Heater,Stainless Steel Heaters,Electric Immersion Water Heater,Metal heater
Guangzhou Quanxu Technology Co Ltd , https://www.skysilmattingagent.com