- Model NO.: LSJ
- Cooling Method: Water-cooled
- Selected Voltage: 380V/50HZ
- Noise Level: Low
- Application Machine: Machining Center
- Condition: New
- Control: PLC System
- Water Temperature Sensor Type: Digital Type
- Transport Package: Wooden Package
- Origin: Zhangjiagang City, Jiangsu Province
- Type: Water-Cooled
- Unit Structure: Integral
- Compressor Number: 1
- Application Fields: Food Processing
- Certification: ISO, CE
- Name: Water Cooler
- Chiller: Industrial Chiller
- Trademark: BIEVO
- Specification: Weight: 230kg
- HS Code: 8418699090
1. Cooling range is from 7Â to 25 oC.
2. Insulated water tank is made of stainless steel.
3. Anti-freezing thermostat is standard equipped.
4. R22 high-efficient refrigerant is adopted in OMC-W series.Refrigeration loop controlled by high and low pressure switches ensures good cooling effect.
5. Overload protection is standard equipped for compressor and pump.
6. Precise temperature controller with an accuracy of ±1 oC is adopted.
7. Low pressure pump is standard equipment.
8. Brand compressor with low noise level, low energy-consumption and long service life is employed.
9. Tube-in-shell condenser with excellent heat transfer and rapid cooling effect is adopted.
APPLICATION
ORSTE's OCM-W water cooled industrial chiller  is used to shorten the products molding cycle, it is also applicable in cooling of equipment in order to maintain a required temperature.Besides, it is suitable for other industry fields with similar cooling requirement.
PRODUCT PARAMETERS
| Parameters | LSJ-5 | LSJ-10 | LSJ-15 | LSJ-20 | LSJ-25 | LSJ-30 | LSJ-40 | ||
| Refrigeration Capacity | Kcal/hr | 13690 | 27370 | 43120 | 57748 | 70120 | 85303 | 110984 | |
| Kw | 15.91 | 31.83 | 50.14 | 67.14 | 81.53 | 99.91 | 129.06 | ||
| Evaporator | Type | Box evaporator/Tube-in-shell type | |||||||
| Water Tank Capacity (L) | 66 | 150 | 200 | 200 | 200 | 280 | 400 | ||
| Condenser | Type | High-efficient copper tube-in-shell style | |||||||
| Compressor | Type | Entire seal vortex type or piston type | |||||||
| Power (kw/hp) | 3.75/5 | 7.5/10 | 11.25/15 | 15/20 | 18.75/25 | 22.5/30 | 30/40 | ||
| Pump | Power (kw) | 0.37 | 1.5 | 1.5 | 2.25 | 2.25 | 3.75 | 5.6 | |
| Head (m) | 10 | 21 | 21 | 39 | 39 | 42 | 48 | ||
| Flow (L/Min) | 100 | 360 | 360 | 650 | 650 | 700 | 800 | ||
| Total Power (kw) | 4.12 | 9 | 12.75 | 17.25 | 21 | 26.25 | 35.6 | ||
| Dimension | L (mm) | 1090 | 1400 | 2235 | 2235 | 2235 | 3050 | 3050 | |
| W (mm) | 490 | 740 | 1050 | 1050 | 1050 | 1100 | 1100 | ||
| H (mm) | 920 | 1380 | 1450 | 1450 | 1450 | 1710 | 1710 | ||
| Weight (kg) | 230 | 420 | 720 | 770 | 790 | 1430 | 1730 | ||
YQ(Y)W series gas-fired/oil-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.
This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).
YQ(Y)W Series Gas/oil fired Thermal Oil Heater
WUXI ZOZEN BOILERS CO.,LTD. , https://www.cnzozen.com