We all know that military life is very heavy. Each day has an essential training task, and there are arrangements for what to do during the prescribed time. There may not be showers when the soldiers are out of the mission. Then there will be military showers.
What are the facilities and equipment on the military shower car?
In addition to being used for daily flush showers, the main task of this shower car is to allow the soldiers to participate in some of the tasks of the epidemic, or go to dangerous locations, and can go to the shower car to disinfect before the return trip to ensure the safety of the soldiers' lives. . The military shower car belongs to the military decontamination vehicle and carries out comprehensive cleaning and disinfection of the soldiers.
The internal structure of the carriage is roughly the same, with several areas, a strip room, a shower room, a power room, and a dressing room. The allocation of these spaces is to prevent cross-infection, so it needs to be separated. The carriage is above the chassis of the car. The major equipment includes hot water devices (similar to water heaters and the like), showers (shower heads), auxiliary equipment, and generator sets. Some use boilers to heat the water temperature.
The specific workflow is this: Use a water pump to put cold water in a heated boiler and let the water level rise. Then sprinkle water from the shower head so that the soldiers can wash a hot bath. The heater is turned on in cold places or when it is colder in the evening. There are special showers and tents. When the work is performed, the horns will place cold water in the mixing room and then heat it. Then the steam is poured into the next tent to disinfect the soldiers.
In summary, there should be a general understanding of the function of the military shower car. In simple terms, it is responsible for disinfecting and cleaning the soldiers who may carry the disease. This procedure is indispensable for the safety of the soldiers. The equipment of the shower car needs regular inspection, and the content of disinfectant and disinfecting water also needs to be strictly controlled. It is related to life safety and needs attention. The cleanliness of the car must be done well.
Wuxi Yuda Polyethylene Welder can meet ISO21307 welding standard. There is a need to examine current practice on a global scale and establish the best procedure(s) for the highest-quality, most reliable and efficient construction of PE butt fusion systems for gas and water distribution.
There are 3 following types of butt fusion welders to meet the standard ISO 21307 : 1. Single Low Pressure Fusion Jointing Welding Machines 2. Double low-pressure Fusion Welders 3. Sigle High Pressure Plastik Welding Equipment. As shown in the graphs of the various systems, the high pressure method of butt welding takes less time to make a weld than low pressure welding fusion. This is a very important factor in lowering the cost of installation, since the cycle times necessary for butt welding large diameter pipes are long. Using the high pressure poly welders means that daily productivity can be significantly increased. Here you can choose relevant SHP series high pressure hdpe welding machines from 40mm-1600mm.
High Pressure Plastic Welding Machine,Butt Fusion Welding,Fusion Welding Machine,Plastic Pipe Welding Machine
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com