Suction pump suction pump from the ground is too low, how to safely drive in the country?
As we all know, most of our country roads are dirt roads. The road conditions are poor. The roads are narrow and uneven, steep and steep. There are rocks and potholes on the road on sunny days. In the rainy days, water, mud, and ravines can be seen on the road surface and even cause road shoulders to collapse. Therefore, when our dirt truck driver friends climb up on our country roads, we must understand the characteristics of our country's road surface and master safe driving essentials to ensure the safety of our driving.
1. Choose a pavement
When encountering potholes and chaos on the road, we should take into account the ground clearance of our vehicles and carefully turn the steering wheel to avoid it. Special care should be taken when passing through soft, muddy, and stagnant sections. The newly opened earth road, if there is a rut on the road, should be driven along the rut as far as possible, not blindly taking risks.
2. Control speed
There are many obstacles such as potholes and gravel in our country's dirt roads, and the driving speed cannot be too high, which will result in damage to the components of the vehicle's power trains and walking systems. When we drive on wet and muddy roads in rainy days, we must stabilize the throttle. We control the speed of our small suction trucks, use medium-low gear shifts and emergency brakes, and even if we need to slow down, we must rely on reducing the throttle to control.
3. Be cautiously downhill
No matter if it is a sunny day or a rainy day, you should select the middle and low gears when you are going downhill to reduce the slow downhill of the throttle, and you must not run the slope in a neutral position. Because there are more potholes and chaotic rocks on the earthy road, the situation is complicated, and braking and deceleration are often required to avoid the ground on the downhill. In particular, there are sharp bends on the way downhill on some dirt roads. Roll over or even roll over.
4. To prevent skidding of the current wheel, the throttle should be stabilized, and the direction of rotation should be corrected. When the rear wheel slides sideways, the steering wheel should be turned in the side-sliding direction until the rear wheel is straightened and then it is in the loop.
5. The suction truck should not be too close to the vehicle in the safe traffic to avoid the dust raised in the front of the car in sunny days or muddy water splashed in the rain to block the sight. In the event of a meeting, attention should be paid to observing the road surface. In particular, do not get too close to the shoulder during a long period of rain to prevent accidents when the vehicle slides sideways.
Aluminum Spacer Bar Bending Machine
Aluminum spacer bar bending machine have two models to bend the aluminum spacer bar:LWJ01 Automatic
spacer bar bending machine which can automatic bend the aluminum spacer bar continuously and bend rectangle and other shape:LWJ02 semi-auto aluminum spacer bar bending machine need to press the foot swithc and only bend rectangle spacer.
Aluminium Profile Bending Machine,Spacer Bar Bending Machine,Automatic Frame Bender,Automatic Bending Machine For Aluminum Bar
JINAN WEILI MACHINE CO LTD , https://www.wlglassmachine.com