Do you work with steel in your manufacturing facility? Whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, a steel briquette machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle. It can also squeeze out the liquids from your scraps.
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Â
| model | Y83W-5000 |
| nominal force | 5000kn |
| briquette diameter | D120 (customized) |
| briquette density | ≥ 5.5t/m³ |
| briquette weight | 5~7kg |
| productivity | 3block/min |
| output in one shift | 8~10t/8h |
| total power | 30kw*2 |
| machine weight | about 11ton |
| overall dimension | host machine: 4500*2050*2350mm oil tank: 1950*1500*1360mm |
Â
: D
Do you work with steel in your manufacturing facility? Whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, a steel briquette machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle. It can also squeeze out the liquids from your scraps.
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Â
| model | Y83W-5000 |
| nominal force | 5000kn |
| briquette diameter | D120 (customized) |
| briquette density | ≥ 5.5t/m³ |
| briquette weight | 5~7kg |
| productivity | 3block/min |
| output in one shift | 8~10t/8h |
| total power | 30kw*2 |
| machine weight | about 11ton |
| overall dimension | host machine: 4500*2050*2350mm oil tank: 1950*1500*1360mm |
Â
: D
There are many types and structures of auto stamping parts, and the materials, specifications, and technical requirements of different types of stamping parts vary greatly. As an important part of the car, it has the following characteristics:
(1) There are various varieties. The car body, chassis, wheels, compartments, radiators, etc. are all automotive stamping parts.
(2) Large in size and complex in shape, including body panels with irregular shapes, frames with a length of more than ten meters, disc-shaped wheels, etc.
(3) High precision and excellent surface quality. Stamping is a non-cutting process, which is produced by precision molds, with high precision and good dimensional consistency.
(4) Low cost. Stamping is an efficient production method. In mass production, a fully automatic stamping production line is used to achieve high production efficiency. On a mass production scale, raw material consumption is low and production costs are low.
If you need stamping part design service to produce sheet metal stamping dies, aluminum stamping parts, etc., please contact us.
Auto Stamping Parts,Sheet Metal Stamping Dies,Aluminum Stamping Parts,Stamping Part Design,Automotive Stamping Parts
Pro Success Development Limited , https://www.prosuccess-metal.com