Model NO.: TP5D-75
Application: Bottles, Jars, Jerry Cans, Gallons, Containers
Station: Double Station
Die Head: Single Head
Max. Product Volume: 5L
Auto-Deflashing: with Auto-Deflashing
Clamping Force: 70 Kn
Mould: One Cavity
Suitable Material: HDPE,PP,PVC,PS,PETG,LDPE
Sutiable: 1L to 5L Bottle
Made in: China
Trademark: DAWSON
Transport Package: Film Packing
Specification: TP5D-75
Origin: Jiangsu Zhangjiagang
HS Code: 8477301000
Double Station Extrusion Blow Molding Machine TP5D-75
Type TP5D-75
Extrusion Blow Molding Machine
Double Station Single Head
*Volume 1L to 5L
*Net Weight 100-280g
*Output 250-380 pcs/hr.
Standard Features
1. Double station blow molding machine with 75mm grooved extruder.
2. Single, double triple and quadruple head capacity.
3. Reliable two-plate axes mould locking.
4. Processing HDPE, LDPE, PP capacity.
5. Multi-blow extrusion heads with quick color change.
6. In machine automatic deflashing and cooling station.
7. Nitrided Screw and berrel.
8. Adopt hydraulic accumulators.
9. Low power consumption.
10. Up blowing system.
11. Machine control by microprocessor B&R
12. SERVO valve for hydraulic and 100/300 point Parison thickness.
13. Gripper for bottle take out inside machine.
14. Carriage fast movement by Prop Valve.
15. Safety ladder and rail protection.
Die head
This machine when using single die head, can make 2L to 5L bottles,
However, the die head can also be changed to double die head, triple die head and 4 head to be able to make other smaller size bottles.
Single die head  (2~5L)
Double die head (0~2L)
Triple die head (0~750ml)
Four die head (0~500ml)
Changing the die head system takes around 1.5~3h, this also included heating time.
Â
Configuration
| Main Part | Brand | |
| Servo oil pump | REXROTH from Germany |
 Â |
| High pressure oil pump | YUKEN from Japan | |
| Pneumatic |
FESTO from Germany or SMC from Japan |
|
| Proportional valves | REXROTH from Germany | |
| Directional valves | YUKEN from Japan | |
| Control system | B&R From Austria | |
| Frequency converter | ABB From Switzerland | |
| Contactor | SCHNEIDER From Franch | |
| Linear roller bearings | HIWIN from TAIWAN | |
| Motor | SIEMENS from Germany | |
| Gearbox | SEW from Germany | |
| Electronic ruler | Novotechnik from Germany | |
Â
The entire Bolt is threaded, and this type of bolt has higher strength and wider range of use than hexagonal and double headed bolts. Hexagonal and double headed bolts are commodity grade bolts, expressed in performance grade. The fully threaded bolt is a specialized grade bolt, which is represented by the material grade. The material substitution for chemical equipment must be confirmed by the design before it can be represented. Once, it was seen on site that a 4.5 grade hexagonal bolt was used to replace a 8.8 grade bolt. This grade 4.5 bolt is not used in chemical engineering.
Allthread Stud,B7 Full Thread Stud Blue,Full Thread Coating Stud Bolt,A320 Full Thread Stud with Nut
AM FASTENER , https://www.asmefastener.com