Four steps maintenance high pressure cleaning car

1. It is to clear away the remains of the car body. You can use the all-round descaling water to wipe with a clean cotton cloth. Then wring out the dustless cotton cloth with the car wash liquid, dry the car paint along the direction perpendicular to the car's driving direction. Car wash on the surface. Finally, rinse the car wash thoroughly with plenty of clean water, and dry it with a synthetic sheepskin towel. Wipe dry to achieve the whole car water-free traces, glass stains; 2. High-pressure water gun cleaning, is the use of high-pressure water gun from top to bottom will be contaminated in the body surface of the sand washed away, then rinse the back of the car body, and finally wash the lower part. This step is to pay attention to the need to fully flush the chassis and thoroughly clean the edges, bends, fenders, etc. Particular care should be taken to thoroughly clean the mud, sand and dirt around the wheels and brake discs, fenders, front grilles, door frames, and skirts.
3 is to wipe, use a car wash sponge shampoo car shampoo, wipe the body again, if contaminated objects are not easy to remove, you can repeatedly wipe, pay attention to wipe the body up and down the sponge to be used separately, so as not to scratch the body under the sand paint body paint. Then rinse with high-pressure water, especially to clean the car seams, foam and other residues at the corner;
4. Apply liquid to spill the shampoo car wash on the body. There are two methods, one is to use multi-functional high-pressure foam washing machine, spray evenly, to the upper and lower regularly shaking nozzle; the second is manual preparation, that is, according to a certain proportion of shampoo car wash liquid, do not use washing powder, soapy water, Dewaxing detergent.
In the case of flushing the grille in front of the car with a high-pressure cleaner, misty water flow should be used. Water column should not be flushed against the fins of the water tank or condenser. If the plastic arch cover is installed on the fender, it should be removed and cleaned. Thoroughly clean the mudguard and the inside of the fenders.

PE WAX

As a lubricant, it has stable chemical properties and good electrical properties. Used as a lubricant for cable insulation materials, it can enhance the diffusion of fillers, increase the extrusion molding rate, increase mold flow, and facilitate demolding. Main scope of application: Can be widely used in the manufacture of masterbatch, granulation, plastic steel, PVC pipe, hot melt adhesive, rubber, shoe polish, leather brightener, cable insulation, floor wax, plastic profiles, ink, injection molding and other products.

Application of polyethylene wax
1. Dense color masterbatch and filling masterbatch. As a dispersant in the processing of color masterbatch, it is widely used in polyolefin masterbatch. It has good compatibility with polyethylene, polyvinyl chloride, polypropylene and other resins, and has excellent external and internal lubrication.
2. PVC profiles, pipes, composite stabilizers are used as dispersants, lubricants and brighteners in the molding process of PVC profiles, pipes, pipe fittings, PE.PP to enhance the degree of plasticization, and improve the toughness and surface smoothness of plastic products And it is widely used in the production of PVC compound Stabilizer.
3. The ink has good light resistance and chemical properties, can be used as a pigment carrier, can improve the abrasion resistance of paints and inks, and improve the dispersion of pigments and fillers. It has a good anti-settling effect. It can be used as a flattening agent for paints and inks. The product has good gloss and three-dimensional effect.
4 Wax products are widely used in the production of various wax products such as floor wax, car wax, glazing wax, candles, crayons, etc., to increase the softening point of wax products, increase their strength and surface gloss.
5. Cable material Used as a lubricant for cable insulation materials, can enhance the diffusion of fillers, increase the extrusion molding rate, increase mold flow, and facilitate demolding.
6. Hot-melt products It is used in various hot-melt adhesives, thermosetting powder coatings, road marking paints, marking paints, as a dispersant, has a good anti-settling effect, and makes the products have a good gloss and three-dimensional effect.
7 Rubber As a rubber processing aid, it can enhance the diffusion of fillers, increase the extrusion molding rate, increase the mold flow rate, facilitate demolding, and improve the surface brightness and smoothness of the product after the film is released.
8 Cosmetics Make products have a good gloss and three-dimensional effect.
9 Injection molding, saving machine power lubrication, and enhancing the surface gloss of products

Pe Wax,Pe Polyethylene Wax,Chemical Pe Wax,Polyethylene Wax

Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com