Electric Actuator Pneumatic Actuator Hydraulic Cylinder Actuator

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
 
 Outline drawing:
 

Technical specification:
1, the speed set in the table for the basic working speed, the value of this speed can be reduced by the user
    needs by the next block, the slowest speed 3.50mm / s, for decontamination of sewage decanter can be the
    slowest speed 0.25mm / Lt; / RTI & gt;
2, the table to determine the trip, the user can choose within the scope.
3, the length of the rod should be added to the LC, the minimum distance for the putter installed from the size.
4, the figure of "street", "extension" material for the 1Cr18Ni9T (stainless steel), mainly for sewage treatment
    plant decanter.

Workshop:


OUR SALES TEAM


Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future! Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
 
 Outline drawing:
 

Technical specification: