DC 24V Magnetic Drive Circulation Submersible Lift 3m Pumps for Water

DC 24V.2A max loading current . 3500L/H max flow rate.3.M max lift.48W power consumption.

1.24V low voltage DC, focus on safety, the first brand of DC Aquarium pump.
2. Pure copper motor, no brush, no pollution, electronic commutation, small heat, high efficiency, long life.
No maintenance, small size, high efficiency, low power consumption, strong anti-interference ability, stable operation.
3. Super power saving, more than 50% energy saving than ordinary pumps.
4. Shock absorption cup, absorb shock, reduce noise, easy to install.
5. The shell is made of high-quality plastic, anti-corrosion, impact resistance, durability, acid and alkali resistance, corrosion resistance. The stator and circuit board parts of the motor are potted with epoxy resin and completely isolated from the rotor, which solves the leakage problem caused by the long-term diving of the pump and is completely waterproof.
6. Solve a series of problems such as stuck in the pump in the complex environment, the pump suddenly does not start, and so on.
7. The pump can be equipped with functions such as water shortage protection, idling protection, stall protection, and stuck protection.
8. Solve the problem of pump-driven mortality. The current market mortality rate for pumps is approximately 2% to 3%. After a long period of research and research, the mortality rate of the pump has been reduced to less than five ten thousandths.
9. Customized design of pumps and related control systems based on user requirements.








Applications: 
Aquarium aeration oxygen filter, aquarium aquarium, pond landscape, fountain, small craft fountain, rockery waterfall, small irrigation system, water curtain wall, small desktop , small water treatment system.

Get more Material,Technical data, Please Send Message 

Brushess Mini DC water pumps work Note: 

1. The pump body that needs to pay attention when using it must be close to the bottom of the cylinder, so that it can effectively increase the pump to pump the bottom of the cylinder and precipitate;
2. Before using the pump, check whether the rated voltage on the nameplate on the pump is the same as the actual voltage.
3. It is necessary to frequently clean the filter head to ensure normal water intake and good filtering effect.
4. The pump must work in water. Do not allow the pump to idle outside the water so as not to damage the pump body.

Customers how to choose the pump:
1. First determine the voltage, current, water head and flow, diameter size.Water pump head is generally the subject of the water which does not flow  when pumped up to the static head, if a customer requires pumping the water to a certain height and then to maintain a certain water flow, The water head must be higher than the specified pumping height.  You can refer to lift- flow graph. 
2. To determine the dimension and form (threaded interface, inlet and outlet orientation, aperture size, etc. )
3. To determine the job requirements (temperature,  work time and frequency)
4. To determine the functional requirements (time control, pressure control, flow control, speed, etc. )

Why choose us?

1.Quality Control
To ensure the quality of our pumps and other products,Our QC staffs do strict supplier evaluations,in-coming inspections,in-process inspections,final inspections and pre-delivery inspections.The most important is that we listen to what our customers say and are always looking for ways to improve the quality of our products through continuous improvement.

2.OEM Ability  
We have built stable and long-term cooperate relationship with supermarkets,we can also provide ODM,OEM and Agent services to our customers over the world.

3.Parts Available
We have spare parts for immediate delivery to anywhere in the world.While our pumps become standard with more features than anyone else, we also offer more optional parts for our pumps than anyone else.

4.Good Warranty
We take customer satisfaction and product quality as the first priority for us. We supply reliable warranties and good after-sales services.

FAQ

1.*Q:Can I get samples from you?
 A:We are honored to offer you samples for quality check.

2.*Q:What parts are manufactured by you?
A:80% of frame parts are manufactured by us.Spare parts are from China top 10 famous suppliers.

3.*Q:What's the leading time?(How long do you need to prepare my goods?)
A:10 days for sample orders.30 days for mass production orders(based on different quantities)

4.*Q:How long do I need to wait before my goods arrive?
A:3-5 days for international express.5-7 days for air transportation, 35-40 days for sea transportation.

5.*Can you put my brand name(logo) on these products?  
A:Yes,or container order.Sticker order qty over 100pcs.

6.*Q:What payment methods do you accept?  
A:T/T,L/C,Western Union,Money Gram,etc.

7.*Q:What certificates do you have?
A:Since Europe and America are our main markets,all of our products are with CE/ISO certificate.For some models,the certificates are already available.For other models,we will need your assistance to apply the certificates.

8.*Q:What is your product quality?
A:Our raw materials are purchased from qualified suppliers.And we have a strong quality control team to guarantee our quality.We always care what you care!!

9.*Q:What is your warranty?
 A:Our warranty is 24 months after delivery.We always pay high attention to after sale service!!

10.*Q:How are parts availability?  
A:We keep stock of spare parts and make sure all parts available whenever you need.
 

DC 24V.2A max loading current . 3500L/H max flow rate.3.M max lift.48W power consumption.

1.24V low voltage DC, focus on safety, the first brand of DC Aquarium pump.
2. Pure copper motor, no brush, no pollution, electronic commutation, small heat, high efficiency, long life.
No maintenance, small size, high efficiency, low power consumption, strong anti-interference ability, stable operation.
3. Super power saving, more than 50% energy saving than ordinary pumps.
4. Shock absorption cup, absorb shock, reduce noise, easy to install.
5. The shell is made of high-quality plastic, anti-corrosion, impact resistance, durability, acid and alkali resistance, corrosion resistance. The stator and circuit board parts of the motor are potted with epoxy resin and completely isolated from the rotor, which solves the leakage problem caused by the long-term diving of the pump and is completely waterproof.
6. Solve a series of problems such as stuck in the pump in the complex environment, the pump suddenly does not start, and so on.
7. The pump can be equipped with functions such as water shortage protection, idling protection, stall protection, and stuck protection.
8. Solve the problem of pump-driven mortality. The current market mortality rate for pumps is approximately 2% to 3%. After a long period of research and research, the mortality rate of the pump has been reduced to less than five ten thousandths.
9. Customized design of pumps and related control systems based on user requirements.








Applications: 
Aquarium aeration oxygen filter, aquarium aquarium, pond landscape, fountain, small craft fountain, rockery waterfall, small irrigation system, water curtain wall, small desktop , small water treatment system.

Get more Material,Technical data, Please Send Message 

Brushess Mini DC water pumps work Note: 

1. The pump body that needs to pay attention when using it must be close to the bottom of the cylinder, so that it can effectively increase the pump to pump the bottom of the cylinder and precipitate;
2. Before using the pump, check whether the rated voltage on the nameplate on the pump is the same as the actual voltage.
3. It is necessary to frequently clean the filter head to ensure normal water intake and good filtering effect.
4. The pump must work in water. Do not allow the pump to idle outside the water so as not to damage the pump body.

Customers how to choose the pump:
1. First determine the voltage, current, water head and flow, diameter size.Water pump head is generally the subject of the water which does not flow  when pumped up to the static head, if a customer requires pumping the water to a certain height and then to maintain a certain water flow, The water head must be higher than the specified pumping height.  You can refer to lift- flow graph. 
2. To determine the dimension and form (threaded interface, inlet and outlet orientation, aperture size, etc. )
3. To determine the job requirements (temperature,  work time and frequency)
4. To determine the functional requirements (time control, pressure control, flow control, speed, etc. )

Why choose us?

1.Quality Control
To ensure the quality of our pumps and other products,Our QC staffs do strict supplier evaluations,in-coming inspections,in-process inspections,final inspections and pre-delivery inspections.The most important is that we listen to what our customers say and are always looking for ways to improve the quality of our products through continuous improvement.

2.OEM Ability  
We have built stable and long-term cooperate relationship with supermarkets,we can also provide ODM,OEM and Agent services to our customers over the world.

3.Parts Available
We have spare parts for immediate delivery to anywhere in the world.While our pumps become standard with more features than anyone else, we also offer more optional parts for our pumps than anyone else.

4.Good Warranty
We take customer satisfaction and product quality as the first priority for us. We supply reliable warranties and good after-sales services.

FAQ

1.*Q:Can I get samples from you?
 A:We are honored to offer you samples for quality check.

2.*Q:What parts are manufactured by you?
A:80% of frame parts are manufactured by us.Spare parts are from China top 10 famous suppliers.

3.*Q:What's the leading time?(How long do you need to prepare my goods?)
A:10 days for sample orders.30 days for mass production orders(based on different quantities)

4.*Q:How long do I need to wait before my goods arrive?
A:3-5 days for international express.5-7 days for air transportation, 35-40 days for sea transportation.

5.*Can you put my brand name(logo) on these products?  
A:Yes,or container order.Sticker order qty over 100pcs.

6.*Q:What payment methods do you accept?  
A:T/T,L/C,Western Union,Money Gram,etc.

7.*Q:What certificates do you have?
A:Since Europe and America are our main markets,all of our products are with CE/ISO certificate.For some models,the certificates are already available.For other models,we will need your assistance to apply the certificates.

8.*Q:What is your product quality?
A:Our raw materials are purchased from qualified suppliers.And we have a strong quality control team to guarantee our quality.We always care what you care!!

9.*Q:What is your warranty?
 A:Our warranty is 24 months after delivery.We always pay high attention to after sale service!!

10.*Q:How are parts availability?  
A:We keep stock of spare parts and make sure all parts available whenever you need.
 

Manual Directional Valves

Manual Directional Valves,Manual Operated Directional Control Valve,Hand Valve Hydraulic,Manual Hydraulic Valve

Jiangsu haohong hydraulic Co.Ltd , https://www.jshhhydraulic.com