Corrugated Roof Sheet Making Machine

Model NO.: STWYX24-210-840
Thickness of Raw Material: 0.3-0.8mm
Yield Strength of Material: 235MPa
Working Speed: About 1500-2000 mm/Min
Type: Metal Tile Forming Machine
Method: Roll Forming
Processing: Roll Forming
Product: Tile
Brick Raw Material: Steel
Automation: Automatic
Trademark: STW
Transport Package: Naked Machine Body Load in 40′ Container
Specification: CE
Origin: Zhejiang, China
HS Code: 88452210
1-Product Feature of 
The colored steel tiles produced by this machine look beautiful ,elegant and noble .They are widely used as the roof of garden ,factory ,hotel,exhibition center and villa ,etc .
 
No.       item Parameter(all is subject to our final design)
1
  		Suitable raw material Type Common galvanized & pre-painted steel
Yield strength 235MPa(or other high strength steel)
Thickness(mm) 0.4-0.7
width(mm) According to final design
2 Manual uncoiler's capacity Max.5tons
3 Forming speed(m/min) About 18-20m/min
4 Main motor power(KW) 7.5kw
5 Hydraulic power(KW) 3kw
6 Forming roller groups  Around19-20 groups
7 Raw material of forming roller High quality No.45 steel
8 Raw material of cutting blade Cr12mould steel with quenched treatment
9 controlling system Mitsubishi PLC& converter
10 Suitable industrial voltage  According to your special requirement
11 Machine dimensions(L*W*H) 6.8m×1.8m×1.52m
12 Machine weight About 9-10tons
 
 
2-Machine components 
Tile forming machine consist of uncoiler, coil sheet guiding machine ,covering film device ,main roll forming system, pressing device,cutting device,Hydraulic station ,PLC control system and support table .
Corrugated Roof Sheet Making Machine

3.Working flow
uncoiling the sheet---guiding the sheet---covering the film---roll forming punching the step---measuring the length---cutting the panel---panels to the supporter
Corrugated Roof Sheet Making Machine

1.Material: Cr18, Cr20, Cr25, Cr27, Cr15Mo1, Cr18Mo1, Cr26Ni4,Cr22Ni4.1.4777, 1.4776, 40CrNiSi2512;1.4823.

2. Process: Lost Foam Process, Shell Mould Process, lost wax process

3. Features of Sinter Grate Bar

a.Using special gauge to check to ensure the size fitts the drawing.

b.Using the X-ray inspection, to ensure that the internal defects of Grate Bar is not less than the level III JISG0581 provisions.

c.Doing impact test and hardness test, to ensure that impact value of grate bar is not less than JISZ2242 provisions.

4.Application: Sintering Machine Grate Bars is sintering machine main parts, it is wearing parts.

5.Casted with your drawing or sample.

Grate Bar

Grate Bar, Sinter Grate Bar, Sintering Machine Grate Bars

QINGYUN HUIHUANG EXACT CASTING CO.,LTD , http://www.sdhhcasting.com