Coolsour Small Bistable Latching Brass Electric Solenoid Valve

Model NO.: C/D Series
Trademark: COOLSOUR
Origin: Zhejiang, China (Mainland)
HS Code: 8418991000
Model NO.: C/D Series
Trademark: COOLSOUR
Origin: Zhejiang, China (Mainland)
HS Code: 8418991000
Solenoid Valve - C Series 
Feature:
1.C Series solenoid valve is a 2-way normally colsed valve which applied into refrigerant or exhausting gas and water, or compressing air;
2.Coil can connect with plug-in connector which configured well with tree wires, so very convenient to install;
3.Coil can be chose with voltage: 24V,110V,220V,380V;
4.Working temperature: -40ºC~110ºC;
5.Max working pressure: 40 bar;
6.Max working differential pressure: 21 bar;
7.Max working circulation times: 100,000.
Model Connection orifice KV Nominal Capacity/KW
Inch mm m³/h R134A R22 R407C R404A
SVC1020/2 1/4" SAE 2.5 0.175 2.95 3.15 3.28 2.08
SVC1020/3 3/8" SAE 3 0.23 3.88 4.14 4.31 2.74
SVC1064/3 3/8" SAE 7 0.8 6.8 9.4 9.3 8
SVC1064/4 1/2" SAE 0.8 6.8 9.4 9.3 8
SVC1070/4 1/2" SAE 16.5 2.2 18.7 25.7 25.6 22
SVC1070/5 5/8" SAE 2.61 32.3 30.5 30.3 26.1
SVC1090/5 5/8" SAE 12.5 3.8 22.2 44.5 44.2 38
SVC1090/6 3/4" SAE 4.8 40.8 56.2 55.8 48
SVC1090/7 7/8" SAE 5.7 48.5 66.7 66.2 57
SVC1028/2 1/4" ODF 2.5 0.15 2.53 2.7 2.81 1.79
SVC1028/3 3/8" ODF 3 0.23 3.88 4.14 4.31 2.74
SVC1068/3 3/8" ODF 7 0.8 6.8 9.4 9.3 8
SVC1068/4 1/2" ODF 0.8 6.8 9.4 9.3 8
SVC1078/4 1/2" ODF 12.5 2.61 22.2 30.5 30.3 26.1
SVC1078/5 5/8" ODF 2.61 22.2 30.5 30.3 26.1
SVC1078/6 3/4" ODF 2.61 22.2 30.5 30.3 26.1
SVC1079/7 7/8" ODF 2.61 22.2 30.5 30.3 26.1
SVC1098/5 5/8" ODF 16.5 3.8 32.3 44.5 44.2 38
SVC1098/6 3/4" ODF 4.8 40.8 56.2 55.8 48
SVC1098/7 7/8" ODF 5.7 48.5 66.7 66.2 57
SVC1099/9 1-1/8" ODF 5.7 48.5 66.7 66.2 57

Solenoid Valve - D Series 
Feature:

1.D series solenoid valve is a direct acting or diaphragm valve which used into liquid pipe line for fluoride agents, suction or hot gas pipe line;
2.Widely used into frozen, refrigerated, air adjustment device, water flow system and so on;
3.Design medium temperature resistant: -40ºC ~ +105ºC;
4.Type: Normally closed type and Normally open type;
5.Coil current: AC or DC;
6.Connector: Flare or ODF braze;
7.Manual operation: With or without.
Model Connection KV Liquid, Nominal Capacity/KW
Inch m³/h R134A R22 R407C R404A/R507
SVD2(S) 1/4" 0.16  2.90  3.20  3.01  2.20 
SVD3(S) 1/4" 0.27  5.00  5.40  5.08  3.80 
3/8"
SVD6(S) 3/8" 0.80  14.80  16.10  15.13  11.20 
1/2"
SVD10(S) 1/2" 1.90  35.30  38.20  35.91  26.70 
5/8"
SVD15(S) 5/8" 2.60  48.30  52.30  49.16  36.50 
5/8"
7/8"
SVD20(S) 7/8" 5.00  92.80  101.00  94.94  70.30 
7/8"
1-1/8"
SVD22(S) 1-3/8" 6.00  111.00  121.00  113.74  84.30 
SVD25(S) 1-1/8" 10.00  186.00  201.00  188.94  141.00 
1-1/8"
SVD32(S) 1-3/8" 16.00  297.00  322.00  302.68  225.00 
1-5/8"
SVD40(S) 1-5/8" 25.00  464.00  503.00  472.82  351.00 
2-1/8"

Other Products:
Coolsour Small Bistable Latching Brass Electric Solenoid Valve

  Solenoid Valve - C Series 
Feature:
1.C Series solenoid valve is a 2-way normally colsed valve which applied into refrigerant or exhausting gas and water, or compressing air;
2.Coil can connect with plug-in connector which configured well with tree wires, so very convenient to install;
3.Coil can be chose with voltage: 24V,110V,220V,380V;
4.Working temperature: -40ºC~110ºC;
5.Max working pressure: 40 bar;
6.Max working differential pressure: 21 bar;
7.Max working circulation times: 100,000.
Model Connection orifice KV Nominal Capacity/KW
Inch mm m³/h R134A R22 R407C R404A
SVC1020/2 1/4" SAE 2.5 0.175 2.95 3.15 3.28 2.08
SVC1020/3 3/8" SAE 3 0.23 3.88 4.14 4.31 2.74
SVC1064/3 3/8" SAE 7 0.8 6.8 9.4 9.3 8
SVC1064/4 1/2" SAE 0.8 6.8 9.4 9.3 8
SVC1070/4 1/2" SAE 16.5 2.2 18.7 25.7 25.6 22
SVC1070/5 5/8" SAE 2.61 32.3 30.5 30.3 26.1
SVC1090/5 5/8" SAE 12.5 3.8 22.2 44.5 44.2 38
SVC1090/6 3/4" SAE 4.8 40.8 56.2 55.8 48
SVC1090/7 7/8" SAE 5.7 48.5 66.7 66.2 57
SVC1028/2 1/4" ODF 2.5 0.15 2.53 2.7 2.81 1.79
SVC1028/3 3/8" ODF 3 0.23 3.88 4.14 4.31 2.74
SVC1068/3 3/8" ODF 7 0.8 6.8 9.4 9.3 8
SVC1068/4 1/2" ODF 0.8 6.8 9.4 9.3 8
SVC1078/4 1/2" ODF 12.5 2.61 22.2 30.5 30.3 26.1
SVC1078/5 5/8" ODF 2.61 22.2 30.5 30.3 26.1
SVC1078/6 3/4" ODF 2.61 22.2 30.5 30.3 26.1
SVC1079/7 7/8" ODF 2.61 22.2 30.5 30.3 26.1
SVC1098/5 5/8" ODF 16.5 3.8 32.3 44.5 44.2 38
SVC1098/6 3/4" ODF 4.8 40.8 56.2 55.8 48
SVC1098/7 7/8" ODF 5.7 48.5 66.7 66.2 57
SVC1099/9 1-1/8" ODF 5.7 48.5 66.7 66.2 57

Solenoid Valve - D Series 
Feature:

1.D series solenoid valve is a direct acting or diaphragm valve which used into liquid pipe line for fluoride agents, suction or hot gas pipe line;
2.Widely used into frozen, refrigerated, air adjustment device, water flow system and so on;
3.Design medium temperature resistant: -40ºC ~ +105ºC;
4.Type: Normally closed type and Normally open type;
5.Coil current: AC or DC;
6.Connector: Flare or ODF braze;
7.Manual operation: With or without.
Model Connection KV Liquid, Nominal Capacity/KW
Inch m³/h R134A R22 R407C R404A/R507
SVD2(S) 1/4" 0.16  2.90  3.20  3.01  2.20 
SVD3(S) 1/4" 0.27  5.00  5.40  5.08  3.80 
3/8"
SVD6(S) 3/8" 0.80  14.80  16.10  15.13  11.20 
1/2"
SVD10(S) 1/2" 1.90  35.30  38.20  35.91  26.70 
5/8"
SVD15(S) 5/8" 2.60  48.30  52.30  49.16  36.50 
5/8"
7/8"
SVD20(S) 7/8" 5.00  92.80  101.00  94.94  70.30 
7/8"
1-1/8"
SVD22(S) 1-3/8" 6.00  111.00  121.00  113.74  84.30 
SVD25(S) 1-1/8" 10.00  186.00  201.00  188.94  141.00 
1-1/8"
SVD32(S) 1-3/8" 16.00  297.00  322.00  302.68  225.00 
1-5/8"
SVD40(S) 1-5/8" 25.00  464.00  503.00  472.82  351.00 
2-1/8"

Other Products:
Coolsour Small Bistable Latching Brass Electric Solenoid Valve

 

Metal Turning Parts

Suprel could make various kinds of metal parts that made by cnc turning.

We have a lot of making experiences on metallic parts like fasteners or hardwares, they are include screws, nuts, bolts, bushes, shaft, pins, studs, valves, plugs, LED metal parts and auto metal parts etc.

With more than ten years' technology accumulation, we suprel have been always dedicated on aluminum profile Heatsinks, and also include various precision machining metal parts. Our smart design custom heatsink and custom machined parts are of good quality and reasonable prices.

metal turning partsmetal parts machiningcnc Turning Parts


metallic turning components,metal machining components,cnc turning parts,aluminum turning parts

Suprel Metalwork Co., Ltd , https://www.suprel-cool.com