There are many choices of materials and shaft sealing systems, chemical pumps are suitable for almost all liquids, usually in the above mentioned industries. For example, we call acids, alkalis, solvents, hydrocarbons, heat transfer liquids, liquid sulfur, heavy oil, bituminous melting plastics.
The chemical standard single-stage volute pump is designed to pull out at the rear, with an end suction flange and flange centerline discharge. The bearing housing and the intermediate housing, the shaft seal and the impeller are a mounting unit. Pulling out the design unit with the back can remove without disconnecting the fitting. If the spacer coupling is used, it can also be fixed to the base plate.
The standard design of the pump housing is cast in one piece and mounted on the foot plate. The shell is a non-asbestos gasket with a sealed atmosphere.
If required, special designs are available:
Pump heating jacket If the temperature of the liquid needed to be lowered, when passing the pump or liquid, the temperature is lower than the melting point. For example: Datang Microelectronics, sulfuric acid fluid, etc. Heat jacket Jacket and intermediate casing welded cover designed for heating liquids up to 24 /350 and 220/430°F
A milling machine is a machine tool that uses a milling cutter to mill a workpiece. In addition to milling planes, grooves, gear teeth, threads, and spline shafts, the milling machine can also process more complex profiles. Usually, the milling cutter is mainly based on rotary motion, and the movement of the workpiece and the milling cutter is the feed motion. It is widely used in machinery manufacturing and repair departments. Whether you are using it for industrial manufacturing, equipment maintenance, or machine tool training, you can buy a suitable ordinary milling machine or CNC Milling machine at HOSTON.
Small Cnc Milling Machine,Common Milling Methods,3 Axis Cnc Milling Machine,Cnc Gantry Type Milling Machine
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hostoncncs.com