Biomaker BS-Hy-800d Widely Used Miniature Large Diameter Sterilizer

           Biomaker BS-HY-800D widely used miniature large diameter sterilizer

Product Numbers: BS-HY-800D 
Product description: BS-HY-800D large diameter sterilizer is using infrared heat sterilization, it is easy to use, simple operation, no fire, good resistance of wind, safe. It can be widely used in the biological safety cabinet, purification table, the exhaust fan, flow car environment.
Product features 
1, Based on the principle of infrared, products are widely used in loop or inoculating needle sterilization, completely replace the alcohol lamp. 
2, The temperature of heating hole can reach 800ºC, sterilization only takes 5-7 seconds, thorough sterilization. Products can be used in anaerobic chamber. 
3, small volume, light weight, appearance and easy to clean. Heating body can adjust angle, easy operation. 
4, organic substances in the ceramic funnel pipe depths ashing prevent infectious spatter and cross contamination. 
5, precise temperature control technology, avoid the heating components work overload, long life.
Normal working conditions            Biomaker BS-HY-800D widely used miniature large diameter sterilizer

Product Numbers: BS-HY-800D 
Product description: BS-HY-800D large diameter sterilizer is using infrared heat sterilization, it is easy to use, simple operation, no fire, good resistance of wind, safe. It can be widely used in the biological safety cabinet, purification table, the exhaust fan, flow car environment.
Product features 
1, Based on the principle of infrared, products are widely used in loop or inoculating needle sterilization, completely replace the alcohol lamp. 
2, The temperature of heating hole can reach 800ºC, sterilization only takes 5-7 seconds, thorough sterilization. Products can be used in anaerobic chamber. 
3, small volume, light weight, appearance and easy to clean. Heating body can adjust angle, easy operation. 
4, organic substances in the ceramic funnel pipe depths ashing prevent infectious spatter and cross contamination. 
5, precise temperature control technology, avoid the heating components work overload, long life.
Normal working conditions

Continuous Foaming Machine

CNC CONTINUOUS HORIZONTAL Foaming Machine can be used for continuous producing Flexible Polyurethane Foam(maxfoam),
which density is 9~50KGS/M³. It can be automatic cutting the foam into difference sizes
which is according to client`s requirement. It can be realized numerical control with accurate
and convenient ration during the whole production. It becomes more easily and stable to
operate the machine.
ï‚  Computerized control system
It can be realized numerical control during the whole production. It is very easy to
operate with its humanization consideration design. It is able to store 100 formulations in
advance.
ï‚  Automatic formulation function
The computer can be automatic to generate formulation for your reference and
calculate the dosage of material if you input the density and color which you need. The
computer can be automatic to check if the formulation is correct when you give the input of
material.
ï‚  Costing function
The computer can be automatic to display the input of chemical material and the output
of foams in each foaming produce.
ï‚  Printing function
All information including the formulation, the input of chemical material and the output of
foams can be printed. The exact data can be used to strengthen management.
ï‚  Electronic metering system
The metering system is adopted the advance electronic metering pumps from U.S.A.
and the monitoring equipment. Through computer, it can display formulation`s dosage of 12
groups` chemical material and actual supply in figure or diagram. The metering system can
be automatic to adjust it with great precision when the actual supply cannot meet the
formulation requirement. It is the base to produce the good foam and to reduce the
unnecessary wastage with this function.
ï‚  High speed mixing system
It adopts two steps mixing with low-pressure and high-speed. This can make the
foam`s air hole fine and smooth. It presets cycle cooling and automatic cleaning functions.
ï‚  Adjustable oven system
The width of two moving side wall can be adjusted for producing difference width foam.
The height of six steps raising platform can be adjusted for producing difference density
foam.
ï‚  Automatic cutting system
It is computerized control. It can be changing the cutting length in any time. The degree
of accuracy can be equal or less than 1mm.

Automatic thermostat apparatus (optional)
It can maintain the suitable temperature of chemical material in order to producing high
quality foam.
Technical Specification:
Model SL-08FC
Chemical 12groups
Foaming type Trough foaming/Spray foaming
Speed of mixing ≤5000rpm/ min
Over length 12.5M
Fall plate 6 steps total 6.25M
Conveyor length 18M
Foam width 1.3-2.25m
Foam height ≤1.25M
Foming speed ≤8m/min
Max output 250kgs/min
Total power 70.85KW
Dimension 38m(L)×4.5m(W)×4m(H)

Foam Molding Machine,Pu Foam Making Machine,Continuous Foaming Machine,Continuous Foam Production Machine

SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.machinesoftlifefoam.com