| PRODUCT NAME | ITEM NO. | PACKAGE SPECS | CBM/BOX | QTY/20GPÂ Â (BOXES) | QTY/40HQÂ Â (BOXES) |
| Â Sticker Remover | QM002500ML480G | 450ML(280G)*24 | 0.023 | 1217 | 3043 |
Â
   Not only can it remove the sticker on the surface of the car window, body, paint surface and the place such as the surface of the marble , but also will remove adhesive residue easily.It has pure and fresh fragrance, wipe after spray , easy to remove.It is suitable for the surface of automobile, glass, billboards which have stickers , such as adhesive label on the car body ,pasting on the windshield , billboards pasting by the road etc.
Â
Directions:
1. First shake before use it and keep the can upright when using it.
2.Rip a small crack, keep 40-50cm away from the object and spray uniformly.Tear it down after the solution penetrate.
3. The color of place where some label torn off is different from the one of the rest places, just because it is without long-term sunshine.There is nothing to do with the use of the product.
Â
Precaution:
Â
Before using, please test.If there is no adverse reactions,just continue using it.
No spraying to the original labels (such as a record of the new car body with manufacturers, models, rating label) and on the license plate etc..
Please do not use it in the plastic resin products, to avoid discoloration or stain and other anomalies.
Keep out of reach of children.
If splashed into eyes,rinse with water immediately and seek medical advice.
Keep the can upright,the horizontal angle should not less than 45 °when used.
Store it in a place with temprature below 40ºC,do not store in cars.keep away from heat and open flame,no exposure,puncture or incinerate cans.
The net and gross weight will be changed with time,it's normal for aerosol products.
wastage rate is not more than 2% yearly.
QINGDAO TONYIN INDUSTRIAL CO.,LTD
ADD: 11/D, Tianzhi Int'l Mansion, Free Trade Zone, Qingdao, Shandong Province,PRC.
SHENZHEN TONYIN TECHNOLOGY CO.,LTD
ADD: Room#5042,Yilan Ge,No.5 of Baolong Er Road,Longgang Street,Longgang District,Shenzhen,PRC.
Mob: +86 185 6175 6871
Website:Â www.tonyingroup.com Sticker Remover
| PRODUCT NAME | ITEM NO. | PACKAGE SPECS | CBM/BOX | QTY/20GPÂ Â (BOXES) | QTY/40HQÂ Â (BOXES) |
| Â Sticker Remover | QM002500ML480G | 450ML(280G)*24 | 0.023 | 1217 | 3043 |
Â
   Not only can it remove the sticker on the surface of the car window, body, paint surface and the place such as the surface of the marble , but also will remove adhesive residue easily.It has pure and fresh fragrance, wipe after spray , easy to remove.It is suitable for the surface of automobile, glass, billboards which have stickers , such as adhesive label on the car body ,pasting on the windshield , billboards pasting by the road etc.
Â
Directions:
1. First shake before use it and keep the can upright when using it.
2.Rip a small crack, keep 40-50cm away from the object and spray uniformly.Tear it down after the solution penetrate.
3. The color of place where some label torn off is different from the one of the rest places, just because it is without long-term sunshine.There is nothing to do with the use of the product.
Â
Precaution:
Â
Before using, please test.If there is no adverse reactions,just continue using it.
No spraying to the original labels (such as a record of the new car body with manufacturers, models, rating label) and on the license plate etc..
Please do not use it in the plastic resin products, to avoid discoloration or stain and other anomalies.
Keep out of reach of children.
If splashed into eyes,rinse with water immediately and seek medical advice.
Keep the can upright,the horizontal angle should not less than 45 °when used.
Store it in a place with temprature below 40ºC,do not store in cars.keep away from heat and open flame,no exposure,puncture or incinerate cans.
The net and gross weight will be changed with time,it's normal for aerosol products.
wastage rate is not more than 2% yearly.
QINGDAO TONYIN INDUSTRIAL CO.,LTD
ADD: 11/D, Tianzhi Int'l Mansion, Free Trade Zone, Qingdao, Shandong Province,PRC.
SHENZHEN TONYIN TECHNOLOGY CO.,LTD
ADD: Room#5042,Yilan Ge,No.5 of Baolong Er Road,Longgang Street,Longgang District,Shenzhen,PRC.
Mob: +86 185 6175 6871
Website:Â www.tonyingroup.com
PTA Powder
Main application:Repair and strengthen workpiece surface, significantly
Welding method:PTA welding
Main equipment:PTA welding machine
Flame core temperature: about 10000℃
Technological characteristics:PTA has high temperature, concentrated energy, stable combustion, small heat affected zone, fast welding speed, high production efficiency, easy to obtain low dilution rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical bonding,, bonding strength is high.
PTA welding technology is one of surface strengthening methods, which has high deposition rate, low dilution rate, and could be applied with many kinds of powder. The manufacturing craft of PTA powder is normally gas atomization, which reduces satellite of powder. We supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based alloy powder, Cobalt-based alloy powder and Mixed Powder.
Nickel Based Alloy Powder possesses high temperature resistance and wear resistance, it is the most popular alloy powder applied by PTA welding both domestically and internationally. Coating hardness is within the range of HRC 30-60. It could be applied to various industries like agriculture, plastic, paper, marine and steel making where wear and corrosion protection needed. Some examples are plunger, moulds, pump leaf and screw.
Iron Based Alloy Powder is more widely used and a more economic choice. With high abrasive resistance, it is more commonly applied to mining tools, drilling tools and mixers of iron and steel making industry, coal industry, shaft, oil and energy industry.
Cobalt Based Alloy Powder is recommended for corrosion and oxidation resistance, with better hot hardness values than equivalent Nickel based alloy powder. It is widely applied to steel making industry, coal industry and mining industry.
Mixed powder mainly refers to NiCrBSi mixing with other hard-phase powder such as cast tungsten carbide and other cemented alloy powder, which allows the powder better hardness around HRC60 and excellent abrasion resistance.
Mixed powder is more often used for mining equipment for oil sands, lignite, oil drilling tools, excavator buckets, extrusion screws for plastic processing, grain and oil processing, etc.
PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvof.com