- Model NO.: SH181
- Usage: Farm Tractor
- Fuel: Gas / Diesel
- Power: 18HP
- Specification: ISO
- HS Code: 87011000
- Type: Walking Tractor
- Drive Wheel: 2WD
- Condition: New
- Trademark: SH
- Origin: Shandong
XCMG Agricultural Machinery produce the most popular walking tractors and power tillers in China.
1. The SH181 Power Tiller/Two-wheel Tractor is of dual-function type that can be used as a means of traction as well as drive.
2. It is featured by its simple and compact structure, good reliability, long service life, easy operation, ample output, light weight and good cross-country ability.
3. It is more powerful and efficient than SH151. It is very suitable for use in paddy fields, dry fields, orhards, vegetable gardens and hilly land with a little inclination.
4. It can be used for rotary tiller, ploughing, harrowing in paddy fields, harvesting, drilling, ditching, transportation and etc. If suitable farm implements or accessories are attached.
5. In addition, it can also be extensively used as a stationary power source for small scale drainage and irrigation, sprinkling, grain threshing, cotton ginning, flour milling, fodder cutting and so on.
| Model of Power Tiller | SH181 |
| Structure weight without rotary tiller | 360KG |
| Structure weight with rotary tiller | 465KG |
| Working Weight (with rotary tiller) | 505KG |
| Turning speed of rotary tiller shaft | 188RPM |
| Overall dimensions (L×W×H) | 2680×960×1250mm |
| Number of blades | 18 |
| Rotary tiller width | 600-1000mm |
| Type of tractor | Single axle,dual-purpose for both tractor &drive |
| Traveling speedForward | 1.4, 2.5, 4.1, 5.3, 9.4, 15.3km/h |
| Traveling speedReverse | 1.1, 3.8km/h |
| Tire Size | 6.00-12 |
| Wheel track | 800,740,640,580(normally use 800) |
| Min.ground clearance | 185 |
| Min.turning radius | 0.9(with no rotary tiller) |
| Model of engine | SH1110A2N |
| Type of engine | Horizontal 4-stroke |
| Bore×stroke | 110×115mm |
| Total displacement | 1.2L |
| Compression ratio | 19.5:1 |
| Turing speed of crankshaft | 2000RPM |
| 1-hour rated output | 18HP |
| Specific fuel consumption | 257g |
| Specific lube oil consumption | ≤2.04g |
| Cooling mode | Condenser(Radiator) |
For iron scraps, whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, Ecohydraulic iron recycling machine can help. If your scraps are small chips, you can choose our Iron Briquette Machine to press your chips to be small blocks. If your scraps are shavings or turnings, you can choose our Iron Baler to press your chips to be square bales, if your scraps are big like pipe tube sheet plate rebar, etc., you can choose our iron shear to cut your scraps to be smaller pieces.
Iron Shavings Recycling Machine, Iron Turnings Recycling Machine, Iron Scraps Recycling Machine, Iron Chips Recycling Machine, Waste Iron Recycling Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycling.com